SIP32414DNP-T1-GE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-UFDFN Exposed Pad |
| Number of Pins | 8 |
| Weight | 50.008559mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2017 |
| Feature | Load Discharge, Slew Rate Controlled |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 62mOhm |
| Max Power Dissipation | 580mW |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | SIP32414 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 5V |
| Output Type | N-Channel |
| Max Output Current | 3A |
| Input Voltage-Nom | 5V |
| Interface | On/Off |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | High Side |
| Power Dissipation | 580mW |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 210 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 2.4A |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 1 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.1V~5.5V |
| Fault Protection | Reverse Current |
| Rds On (Typ) | 62m Ω |
| Height Seated (Max) | 0.6mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SIP32414DNP-T1-GE4 Overview
A Tape & Reel (TR) is used to package it.In the 8-UFDFN Exposed Pad package, it is included.Mounting type Surface Mount is selected for the LED driving board.General Purpose is the switch type it owns.To ensure reliable operation, the temperature should be set to -40°C~125°C TJ.There is a default setting of 2 for output.A voltage of Not Required is used to power it.Voltage output is N-Channel volts at maximum.The lighting driver has Load Discharge, Slew Rate Controlled features.It belongs to the family SIP32414.A total of 8 terminations have been recorded.The operation is carried out using the 8 pins.It has 1 functions.In order to meet the operation criteria, the maximum output current drops to 3A.It is positioned in the direction of Surface Mount.8 pins are connected to it in total.The LED driver has 62mOhm resistance.This case results in a 2A output current.This LED driving board uses an analog IC DUAL SWITCHING CONTROLLER.
SIP32414DNP-T1-GE4 Features
Resistance of 62mOhm
SIP32414DNP-T1-GE4 Applications
There are a lot of Vishay Siliconix SIP32414DNP-T1-GE4 Power Switches ICs applications.
- Mobile Communication Devices
- USB Power Distribution
- PDAs
- Telecom and Network Systems
- USB Ports/Hubs
- USB Protection
- Wireless/Networking Cards
- Smartphone and PDA
- Smart Phones, Feature Phones
- Portable GPS
