SIP32416DNP-T1-GE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-UFDFN Exposed Pad |
| Number of Pins | 8 |
| Weight | 50.008559mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Digi-Reel® |
| Published | 2014 |
| Feature | Load Discharge, Slew Rate Controlled |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 76mOhm |
| Max Power Dissipation | 580mW |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | SIP32416 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 5V |
| Output Type | N-Channel |
| Max Output Current | 2.4A |
| Input Voltage-Nom | 5V |
| Interface | On/Off |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | High Side |
| Power Dissipation | 580mW |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 3.8 ms |
| Switch Type | General Purpose |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 1 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.1V~5.5V |
| Fault Protection | Reverse Current |
| Rds On (Typ) | 62m Ω |
| Height Seated (Max) | 0.6mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
SIP32416DNP-T1-GE4 Overview
The LED driver's packaged as a Digi-Reel?.Package 8-UFDFN Exposed Pad contains it.Surface Mount is the mounting type of the LED driver.A General Purpose switch type is owned by it.In order to guarantee reliable performance, the temperature should be set to -40°C~125°C TJ.As a default, the output is set to 2.Operation is based on Not Required supply voltage.There is a maximum output voltage of N-Channel volts.A lighting driver with Load Discharge, Slew Rate Controlled features is available.It is part of the SIP32416 family of LED drivers.It consists of 8 terminations in total.The 8 pins are used to operate the LED driver.The LED driving board has a total of 1 functions.It is necessary to reduce the maximum output current to 2.4A to meet the operation criteria.Surface Mount is mounted in the way of this LED driving board.There are 8 pins in total on this board.There is 76mOhm resistance on the LED driver.This case has the output current set to 2A.It uses an analog IC, which is DUAL SWITCHING CONTROLLER.
SIP32416DNP-T1-GE4 Features
Resistance of 76mOhm
SIP32416DNP-T1-GE4 Applications
There are a lot of Vishay Siliconix SIP32416DNP-T1-GE4 Power Switches ICs applications.
- Set-top-box
- Wireless Headsets
- Portable GPS
- PC Card Hot Swap
- Portable Devices
- Telecom and Network Systems
- Hot-Swap Systems
- Wireless Modem Data Cards
- Set-Top Boxes
- Solid State Drivers
