SIP32419DN-T1-GE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Number of Pins | 10 |
| Weight | 50.008559mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Feature | Power Good, Slew Rate Controlled, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Resistance | 56mOhm |
| Max Power Dissipation | 1.42W |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 3.5A |
| Supply Voltage-Min (Vsup) | 6V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | SPST |
| Nominal Supply Current | 170μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 550 μs |
| Switch Type | General Purpose |
| Nominal Input Voltage | 28V |
| Turn-Off Delay Time | 1 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~28V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 56m Ω |
| Max Junction Temperature (Tj) | 150°C |
| On-State Resistance | 56mOhm |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SIP32419DN-T1-GE4 Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).In the 10-VFDFN Exposed Pad package, it is included.Mounting type Surface Mount is selected for the LED driving board.The switch type of this switch is General Purpose.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.There is a default setting of 1 for output.The LED driving board operates with a supply voltage of Not Required.It produces a maximum output voltage of P-Channel volts at its maximum output.The lighting driver has Power Good, Slew Rate Controlled, Status Flag features.As a result, there are 10 terminations.10 pins are used for operation.The LED driver has 1 functions.The maximum output current is reduced to 3.5A to meet the operation criteria.With a supply voltage of 12V, high efficiency is possible.This lighting driver is mounted in the way of Surface Mount.In this LED driving board, there is 56mOhm resistance.To maintain a normal operation, the supply voltage (Vsup) must be maintained above 6V.It uses an analog IC, which is SPST.In total, there are 1 channels available.
SIP32419DN-T1-GE4 Features
Supplied from 12V
Resistance of 56mOhm
1 channels
SIP32419DN-T1-GE4 Applications
There are a lot of Vishay Siliconix SIP32419DN-T1-GE4 Power Switches ICs applications.
- Portable/Handheld Devices
- Gaming
- Set-top-box
- Storage (HDDs, SSDs)
- Portable GPS
- Hot-Swap Systems
- Wireless Headsets
- Solid-State Drives
- Hard Disk Drives
- Mobile Communication Devices
