SIP32431DNP3-T1GE4
| Parameters | |
|---|---|
| Interface | On/Off |
| Output Configuration | High Side |
| Power Dissipation | 324mW |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 μs |
| Switch Type | General Purpose |
| Rise Time | 140μs |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 4 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.5V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Reverse Current |
| Rds On (Typ) | 105m Ω |
| Max Junction Temperature (Tj) | 125°C |
| Built-in Protections | TRANSIENT; THERMAL |
| Height | 600μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-UFDFN Exposed Pad |
| Number of Pins | 4 |
| Weight | 50.008559mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Feature | Slew Rate Controlled |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 520mOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 324mW |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | SIP32431 |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 1.4A |
| Power Supplies | 2/5V |
SIP32431DNP3-T1GE4 Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).In the 4-UFDFN Exposed Pad package, it is included.The lighting driver is mounted in the Surface Mount position.General Purpose is the switch type it owns.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.By default, it is set to output 1.The LED driving board operates with a supply voltage of Not Required.A maximum output voltage of P-Channel volts can be achieved by this LED driver.In terms of features, the LED driving board has Slew Rate Controlled.It comes under the family of SIP32431.A total of 4 terminations have been found in it.The 4 pins are used for the operation of the system.Currently, there are 1 functions associated with the lighting driver.The maximum output current drops to 1.4A in order to meet the operation criteria.High efficiency is possible when the supply voltage is set to 5V.The LED driving board is mounted in the way of Surface Mount.In total, it has 4 pins.It has a resistance of 520mOhm.This case has the output current set to 1A.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.This part has a power supply of 2/5V volts.
SIP32431DNP3-T1GE4 Features
Supplied from 5V
Resistance of 520mOhm
SIP32431DNP3-T1GE4 Applications
There are a lot of Vishay Siliconix SIP32431DNP3-T1GE4 Power Switches ICs applications.
- PC Cards
- Wireless/Networking Cards
- Storage (HDDs, SSDs)
- Hot-Swap Systems
- Hard Disk Drives
- Smart Phones, Feature Phones
- USB3.1 Power Delivery
- Hot Swap
- USB Ports/Hubs
- Portable Music Players
