SIP32431DR3-T1GE3
| Parameters | |
|---|---|
| Number of Pins | 6 |
| Weight | 28.009329mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| Feature | Slew Rate Controlled |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 147mOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 250mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | SIP32431 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 3A |
| Power Supplies | 2/5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Power Dissipation | 250mW |
| Output Current | 1.2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 1A |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 4 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.5V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Reverse Current |
| Turn On Time | 40 μs |
| Rds On (Typ) | 147m Ω |
| Max Junction Temperature (Tj) | 125°C |
| Built-in Protections | TRANSIENT; THERMAL |
| On-State Resistance | 178mOhm |
| Height | 1.1mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
SIP32431DR3-T1GE3 Overview
The LED driver's packaged as a Tape & Reel (TR).It's included in the 6-TSSOP, SC-88, SOT-363 package.Surface Mount is the mounting type of the LED driver.It owns the General Purpose switch type.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.There are 1 outputs available on this lighting driver.The LED driving board operates at Not Required volts.The maximum output voltage is P-Channel volts.There are Slew Rate Controlled features available on the LED driving board.The SIP32431 family contains this object.A total of 6 terminations have been found in it.The 6 pins are used to operate the LED driver.It has 1 functions.This operation requires the maximum output current to be decreased to 3A.The supply voltage can be 5V for high efficiency.The LED driving board is mounted in the way of Surface Mount.In total, it has 6 pins.147mOhm is the resistance of the lighting driver.This results in a 1.2A output current.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.The power supply of the part is 2/5V.
SIP32431DR3-T1GE3 Features
Supplied from 5V
Resistance of 147mOhm
SIP32431DR3-T1GE3 Applications
There are a lot of Vishay Siliconix SIP32431DR3-T1GE3 Power Switches ICs applications.
- Low Voltage I/O System Power
- Various applications equipped with buttons
- USB Power Distribution
- USB3.1 Power Delivery
- Solid State Drivers
- Mobile Communication Devices
- PC Card Hot Swap
- USB Power Distribution
- Set-Top Boxes
- HDD, SSD
