SIP32451DB-T2-GE1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-UFBGA, CSPBGA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Digi-Reel® |
| Published | 2013 |
| Series | MICRO FOOT® |
| Feature | Load Discharge |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 65mOhm |
| Max Power Dissipation | 196mW |
| Base Part Number | SIP32451 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Operating Supply Voltage | 2.5V |
| Interface | On/Off |
| Analog IC - Other Type | SPST |
| Nominal Supply Current | 34μA |
| Output Configuration | High Side |
| Output Current | 1.2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 60μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 900mV |
| Max Input Voltage | 2.5V |
| Nominal Input Voltage | 2.5V |
| Turn-Off Delay Time | 1 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 0.9V~2.5V |
| Fault Protection | Reverse Current |
| Rds On (Typ) | 54m Ω |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
SIP32451DB-T2-GE1 Overview
Digi-Reel? is the way it's packaged.It is included with the 4-UFBGA, CSPBGA package as well.Surface Mount is the mounting type of the LED driver.There is a switch type of General Purpose.To ensure reliable performance, the temperature should be set to -40°C~125°C TJ.There are 1 outputs available on this lighting driver.Operation is based on a supply voltage of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.A lighting driver with Load Discharge features is available.The SIP32451 family consists of this type.The 4 pins are used for the operation of the system.Surface Mount is mounted in the way.Currently, the LED driving board has 65mOhm resistance.This electrical component can be found in the MICRO FOOT? series.When this case is used, the output current is set to 1.2A.It uses an analog IC, which is SPST.Optimal efficiency requires a voltage of 2.5V.As far as input voltage goes, its maximum is 2.5V volts.As far as input voltage goes, it has a minimum of 900mV volts.The maximum current required for its operation is 60μA.
SIP32451DB-T2-GE1 Features
Resistance of 65mOhm
SIP32451DB-T2-GE1 Applications
There are a lot of Vishay Siliconix SIP32451DB-T2-GE1 Power Switches ICs applications.
- Set-top-box
- Portable Devices
- Smart Phones, Feature Phones
- PC Cards
- Portable GPS Device
- Notebook PC
- Set-Top Boxes
- HDD, SSD
- Portable Music Players
- Portable Video Game Players
