Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
4-UFBGA, CSPBGA |
Number of Pins |
4 |
Supplier Device Package |
4-WCSP (0.76x0.76) |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Digi-Reel® |
Published |
2012 |
Series |
MICRO FOOT® |
Part Status |
Discontinued |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Resistance |
65mOhm |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Power Rating |
196mW |
Max Power Dissipation |
196mW |
Base Part Number |
SIP3245* |
Number of Outputs |
1 |
Output Type |
N-Channel |
Max Output Current |
1.2A |
Voltage |
2.5V |
Interface |
On/Off |
Max Supply Voltage |
2.5V |
Min Supply Voltage |
900mV |
Current - Output (Max) |
1.2A |
Current |
1.2A |
Output Configuration |
High Side |
Output Current |
1.2A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Turn On Delay Time |
1 μs |
Switch Type |
General Purpose |
Nominal Input Voltage |
2.5V |
Turn-Off Delay Time |
1 μs |
Ratio - Input:Output |
1:1 |
Voltage - Load |
0.9V~2.5V |
Fault Protection |
Reverse Current |
Rds On (Typ) |
54mOhm |
Height |
545μm |
Length |
800μm |
Width |
800μm |
Radiation Hardening |
No |
REACH SVHC |
Unknown |
RoHS Status |
ROHS3 Compliant |
SIP32452DB-T2-GE1 Overview
A Digi-Reel? is used to package it.Package 4-UFBGA, CSPBGA contains it.The mounting type of the LED driver is Surface Mount.It owns General Purpose switch type.Ensure reliable operation by setting the temperature to -40°C~125°C TJ.It is possible to use 1 outputs in the lighting driver.The LED driving board operates at Not Required volts.A maximum output voltage of N-Channel volts can be obtained with this LED driver.There is a SIP3245* family of things that it belongs to.For operation, we use the 4 pins.In this case, the LED driving board can produce only 1.2AV as its maximum output.This operation requires the maximum output current to be decreased to 1.2A.It is positioned in the direction of Surface Mount.Lighting drivers with 65mOhm resistance are used.These electrical components are part of the MICRO FOOT? series.In this case, the output current will be set to 1.2A.For stable operation, the maximum operating temperature is 85°C°C.In order to ensure reliability, it must operate at a minimum temperature of -40°C degrees Celsius.As a result, it is only capable of handling voltages up to 2.5VV.Alternatively, 900mV volts can be used if needed.
SIP32452DB-T2-GE1 Features
Resistance of 65mOhm
SIP32452DB-T2-GE1 Applications
There are a lot of Vishay Siliconix SIP32452DB-T2-GE1 Power Switches ICs applications.
- PDAs
- HDD and SSD
- USB Ports/Hubs
- Hot Swap
- Portable/Handheld Devices
- Wearable Devices
- Low Voltage I/O System Power
- Notebook PC
- Telecom and Network Systems
- Portable Music Players