SIP32454DB-T2-GE1

N-Channel PMIC MICRO FOOT? Series SIP32454 4 Pin 4-UFBGA, CSPBGA

Manufacturer: Vishay Siliconix
Nocochips NO: 880-SIP32454DB-T2-GE1
Package: 4-UFBGA, CSPBGA
Datasheet: PDF
Stock: 351
Description: N-Channel PMIC MICRO FOOT? Series SIP32454 4 Pin 4-UFBGA, CSPBGA (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	4-UFBGA, CSPBGA
Number of Pins	4
Supplier Device Package	4-WCSP (0.76x0.76)
Operating Temperature	-40°C~125°C TJ
Packaging	Digi-Reel®
Published	2013
Series	MICRO FOOT®
Feature	Load Discharge, Slew Rate Controlled
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Resistance	35mOhm
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Power Rating	196mW
Max Power Dissipation	196mW
Base Part Number	SIP32454
Number of Outputs	1
Output Type	N-Channel
Voltage	2.5V
Interface	On/Off
Max Supply Voltage	2.5V
Min Supply Voltage	800mV
Current - Output (Max)	1.2A
Current	1.2A
Output Configuration	High Side
Output Current	1.2A
Voltage - Supply (Vcc/Vdd)	Not Required
Input Type	Non-Inverting
Turn On Delay Time	1.2 ms
Switch Type	General Purpose
Nominal Input Voltage	2.5V
Turn-Off Delay Time	1 μs
Ratio - Input:Output	1:1
Voltage - Load	0.8V~2.5V
Fault Protection	Reverse Current
Rds On (Typ)	28mOhm
Height	545μm
Length	800μm
Width	800μm
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant

SIP32454DB-T2-GE1 Overview

As a result, it is packaged in the form of a Digi-Reel?.It is included in the package 4-UFBGA, CSPBGA.The lighting driver is mounted in the Surface Mount position.This switch is of type General Purpose.To ensure reliable operation, set the temperature to -40°C~125°C TJ.The LED driver is equipped with 1 outputs.The LED driving board is powered by a voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.There are Load Discharge, Slew Rate Controlled features available on the LED driving board.It is a member of the SIP32454 family.The operation is carried out using the 4 pins.The lighting driver's maximum output is 1.2AV.It is positioned in the direction of Surface Mount.Lighting drivers with 35mOhm resistance are used.The MICRO FOOT? series includes this electrical component.This case results in a 1.2A output current.Stable operation is possible with a maximum operating temperature of 85°C°C.It operates at a minimum working temperature of -40°C degrees Celsius to ensure reliability.A maximum supply voltage of 2.5VV can be handled by the LED driving board.Alternatively, 800mV volts can be used if needed.