SIP32458DB-T2-GE1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFBGA, CSPBGA |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Digi-Reel® |
| Published | 2013 |
| Feature | Slew Rate Controlled |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 36mOhm |
| Max Power Dissipation | 500mW |
| Base Part Number | SIP32458 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Operating Supply Voltage | 5.5V |
| Interface | On/Off |
| Analog IC - Other Type | SPST |
| Nominal Supply Current | 4.2μA |
| Output Configuration | High Side |
| Power Dissipation | 500mW |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 9.5μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 500 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.5V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 18 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.5V~5.5V |
| Fault Protection | Reverse Current |
| Rds On (Typ) | 20m Ω |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SIP32458DB-T2-GE1 Overview
It is packaged in the form of a Digi-Reel?.There is a 6-UFBGA, CSPBGA package that includes it.In this case, the LED driving board is mounted as Surface Mount.The switch type of this switch is General Purpose.Keeping the temperature at -40°C~125°C TJ ensures reliable operation.The LED driver has a total of 1 outputs.In order to operate, it requires a voltage supply of Not Required.A maximum voltage of P-Channel volts is available from the output of this LED driver.Currently, the LED driving board is equipped with Slew Rate Controlled features.It is a member of the SIP32458 family.It is necessary to use the 6 pins in order to operate the LED driver.It is mounted in the way of Surface Mount.36mOhm resistance is present in the lighting driver.This results in a 3A output current.In this case, a digital IC is used, which is SPST.For maximum efficiency, the supply voltage should be set to 5.5V.There is a maximum input voltage of 5.5V volts.It has a 1.5V volt minimum input voltage.A maximum current requirement of 9.5μA is required for its operation.
SIP32458DB-T2-GE1 Features
Resistance of 36mOhm
SIP32458DB-T2-GE1 Applications
There are a lot of Vishay Siliconix SIP32458DB-T2-GE1 Power Switches ICs applications.
- Wireless/Networking Cards
- Portable Video Game Players
- Various applications equipped with buttons
- Hot-Swap Systems
- PC Card Hot Swap
- Low Voltage I/O System Power
- Mobile Communication Devices
- Hot Swap
- Hot Swaps
- HDD and SSD
