banner_page

SIP32459DB-T2-GE1

P-Channel PMIC SIP32459 6 Pin 6-UFBGA, CSPBGA


  • Manufacturer: Vishay Siliconix
  • Nocochips NO: 880-SIP32459DB-T2-GE1
  • Package: 6-UFBGA, CSPBGA
  • Datasheet: PDF
  • Stock: 550
  • Description: P-Channel PMIC SIP32459 6 Pin 6-UFBGA, CSPBGA (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 6-UFBGA, CSPBGA
Number of Pins 6
Operating Temperature -40°C~125°C TJ
Packaging Digi-Reel®
Published 2013
Feature Load Discharge, Slew Rate Controlled
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Resistance 36mOhm
Max Power Dissipation 500mW
Base Part Number SIP32459
Number of Outputs 1
Output Type P-Channel
Operating Supply Voltage 5.5V
Interface On/Off
Analog IC - Other Type SPST
Nominal Supply Current 4.2μA
Output Configuration High Side
Power Dissipation 500mW
Output Current 3A
Voltage - Supply (Vcc/Vdd) Not Required
Max Supply Current 9.5μA
Input Type Non-Inverting
Turn On Delay Time 500 μs
Switch Type General Purpose
Min Input Voltage 1.5V
Max Input Voltage 5.5V
Nominal Input Voltage 5.5V
Turn-Off Delay Time 18 μs
Ratio - Input:Output 1:1
Voltage - Load 1.5V~5.5V
Rds On (Typ) 20m Ω
Radiation Hardening No
REACH SVHC Unknown
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SIP32459DB-T2-GE1 Overview


As a result, it is packaged in the form of a Digi-Reel?.It is included in the package 6-UFBGA, CSPBGA.The lighting driver has the mounting type Surface Mount.The switch type is General Purpose.It is recommended that the temperature be set to -40°C~125°C TJ for reliable performance.By default, it is set to output 1.It uses a supply voltage of Not Required to operate.A maximum output voltage of P-Channel volts can be achieved by this LED driver.As far as features are concerned, the LED driving board has Load Discharge, Slew Rate Controlled.This object belongs to the SIP32459 family.6 pins are used for operation.The lighting driver is mounted in the way of Surface Mount.It has 36mOhm resistance.It is set to 3A in this case.In this lighting driver, SPST is the analog IC.It is recommended that the supply voltage be set at 5.5V in order to achieve maximum efficiency.As far as input voltage goes, its maximum is 5.5V volts.As far as input voltage goes, it has a minimum of 1.5V volts.This system has a maximum current requirement of 9.5μA.

SIP32459DB-T2-GE1 Features


Resistance of 36mOhm

SIP32459DB-T2-GE1 Applications


There are a lot of Vishay Siliconix SIP32459DB-T2-GE1 Power Switches ICs applications.

  • Smart Phones, Feature Phones
  • Solid State Drivers
  • Storage (HDDs, SSDs)
  • USB Power Distribution
  • Handheld Devices
  • Hard Disk Drives
  • Wireless Headsets
  • PC Cards
  • Notebook and Tablet Computers
  • Mobile Communication Devices

Write a review

Note: HTML is not translated!
    Bad           Good