SIP32461DB-T2-GE1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-UFBGA, CSPBGA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Digi-Reel® |
| Published | 2016 |
| Feature | Slew Rate Controlled |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 150mOhm |
| Max Power Dissipation | 300mW |
| Base Part Number | SIP32461 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Operating Supply Voltage | 5.5V |
| Interface | On/Off |
| Analog IC - Other Type | SPST |
| Current - Output (Max) | 1.2A |
| Nominal Supply Current | 4.5μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 7μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 130 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.2V |
| Max Input Voltage | 5.5V |
| Turn-Off Delay Time | 2 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.2V~5.5V |
| Fault Protection | Reverse Current |
| Rds On (Typ) | 50m Ω |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SIP32461DB-T2-GE1 Overview
As you can see, it's packaged in the way of a Digi-Reel?.There is a package for it in the 4-UFBGA, CSPBGA package.This LED driving board is mounted using the mounting type Surface Mount.General Purpose is the switch type it owns.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.The lighting driver has a total of 1 outputs that are available for use.A supply voltage of Not Required is required for it to operate.The maximum output voltage of this LED driver is N-Channel volts.Currently, the LED driving board is equipped with Slew Rate Controlled features.It is a member of the SIP32461 family.For operation, we use the 4 pins.1.2AV is the maximum output of the LED driver.Surface Mount is mounted in the way of this LED driving board.In this case, there is 150mOhm resistance in the LED driving board.This LED driving board uses an analog IC SPST.It is recommended that the supply voltage be set at 5.5V in order to achieve maximum efficiency.This LED driver can handle voltages up to 5.5V volts.The input voltage minimum is 1.2V volts.It requires 7μA current to operate.
SIP32461DB-T2-GE1 Features
Resistance of 150mOhm
SIP32461DB-T2-GE1 Applications
There are a lot of Vishay Siliconix SIP32461DB-T2-GE1 Power Switches ICs applications.
- USB Power Distribution
- Hot Swaps
- USB Protection
- Solid State Drivers
- PC Cards
- Portable GPS
- Portable Devices
- PDAs
- USB3.1 Power Delivery
- Various applications equipped with buttons
