SIP41104DY-T1-E3
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 770mW |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | SIP41104 |
| Pin Count | 8 |
| Max Output Current | 1.5A |
| Power Supplies | 5V |
| Operating Supply Current | 3.5mA |
| Power Dissipation | 770mW |
| Max Supply Current | 3.5mA |
| Propagation Delay | 30 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 30 ns |
| Rise Time | 55ns |
| Fall Time (Typ) | 45 ns |
| Rise / Fall Time (Typ) | 32ns 36ns |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Turn On Time | 0.055 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Supply Voltage1-Nom | 5V |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 900mA 1.1A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.5V 4V |
| Turn Off Time | 0.03 μs |
| High Side Voltage - Max (Bootstrap) | 50V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
SIP41104DY-T1-E3 Overview
Gate drivers provides greater flexibilGate driversy to use the 8-SOIC (0.154, 3.90mm Width) package.Tape & Reel (TR) represents the package.A total of 2 drivers are integrated into its configuration.In this case, gate drivers is mounted along the way of Surface Mount.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 4.5V~5.5V.Gate type N-Channel MOSFET has been used in its design.This device is allowed to operate in a temperature range of -40°C~125°C TJ.Non-Inverting is the input type used in this program.It's configured with 8 terminations.There are numerous related parts listed under its base part number SIP41104.Devices are mounted by Surface Mount.Devices have 8 pins available.A supply voltage of 5V is required for operation.In the maximum case, the output current can be 1.5A volts.This subcategory of MOSFET Drivers has a number of useful electronic components.The board contains 8 pins for component connections.Mosfet driver is possible to set the high-side voltage - Max (Bootstrap) to 50V.Based on the maximum power dissipation of 770mW, it is clear that it is capable of transferring and conducting power losses without becoming overheated.In order to ensure greater stability, it is recommended to keep the supply current at 3.5mA.Based on its power supplies of 5V, it solves the problem of power supply failure for a variety of applications.With a voltage of 3.5mA, it operates with a constant current.Improved efficiency can be obtained based on the frequency of 1MHz.
SIP41104DY-T1-E3 Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 50V
Maximum power dissipation of 770mW
SIP41104DY-T1-E3 Applications
There are a lot of Vishay Siliconix SIP41104DY-T1-E3 gate drivers applications.
- Active filtering
- High current laser/LED systems
- Industrial Motor Inverter - Power Tools, Robotics
- Motor Drives
- AC-DC Inverters
- High-voltage isolated DC-DC converters
- Isolated Supplies for Motor Control
- Portable computers
- High frequency line drivers
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
