SIP41111DY-T1-E3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -65°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 522mW |
| Voltage - Supply | 9V~13.2V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | SIP41111 |
| Pin Count | 8 |
| Output Voltage | 89.3V |
| Max Output Current | 2A |
| Operating Supply Current | 3mA |
| Power Dissipation | 522mW |
| Max Supply Current | 3mA |
| Propagation Delay | 23 ns |
| Input Type | Non-Inverting |
| Rise Time | 14ns |
| Fall Time (Typ) | 15 ns |
| Rise / Fall Time (Typ) | 13ns 15ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 4V 7V |
| High Side Voltage - Max (Bootstrap) | 75V |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
SIP41111DY-T1-E3 Overview
For greater flexibility, the 8-SOIC (0.154, 3.90mm Width) package is adopted.A packaging method of Tape & Reel (TR) is indicated.Gate drivers is configured wGate driversh 2 drivers.Surface Mount is mounted in the way of the device.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 9V~13.2V supply voltage.This device is designed with a N-Channel MOSFET gate type.For this device, the temperature range is -65°C~150°C TJ.Mosfet driver accepts input of type Non-Inverting.8 terminations constitute its foundation.There are numerous related parts listed under its base part number SIP41111.Surface Mount is the way it takes to mount the device.The pins are configured with 8 when designing the chip.A supply voltage of 12V is required for operation.There is a maximum output current of 2A.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.The board contains 8 pins for component connections.Mosfet driver is possible to set the high-side voltage - Max (Bootstrap) to 75V.Its maximum power dissipation of 522mW also demonstrates its maximum ability to transfer power without overheating.The supply current should be kept at 3mA to ensure higher stability.In this case, the voltage is 89.3V.The power supply voltage for this device is set to 3mA.
SIP41111DY-T1-E3 Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 75V
Maximum power dissipation of 522mW
SIP41111DY-T1-E3 Applications
There are a lot of Vishay Siliconix SIP41111DY-T1-E3 gate drivers applications.
- Smart Phones
- serial peripheral interface (SPI), I2C
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Motor Controls
- Solar inverters
- Line drivers
- Multicolor LED/laser displays
- Industrial motor drives - compact, standard, premium, servo drives
- Telecom switch mode power supplies
- Solar power supplies
