SIP4280ADT-3-T1-E3
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 6 |
| Weight | 36.003894mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 80mOhm |
| Terminal Finish | MATTE TIN |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 440mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 10 |
| Base Part Number | SIP4280 |
| Pin Count | 6 |
| JESD-30 Code | R-PDSO-G8 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Power Dissipation | 440mW |
| Output Current | 2.3A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.5V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | UVLO |
| Turn On Time | 40 μs |
| Rds On (Typ) | 80m Ω |
| Built-in Protections | TRANSIENT; UNDER VOLTAGE |
| Height | 990.6μm |
| Length | 3.0988mm |
| Width | 1.7018mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
SIP4280ADT-3-T1-E3 Overview
It is package in Tape & Reel (TR) case.This file is included in package SOT-23-6 Thin, TSOT-23-6.The mounting type of the LED driver is Surface Mount.There is a switch type of General Purpose.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.The LED driver is equipped with 1 outputs.Operation is based on Not Required supply voltage.A maximum output voltage of P-Channel volts can be achieved by this LED driver.As far as features are concerned, the LED driving board has Load Discharge, Slew Rate Controlled.This object belongs to the SIP4280 family.A total of 8 terminations have been recorded.For operation, we use the 6 pins.Currently, there are 1 functions associated with the lighting driver.It is possible to achieve a high level of efficiency with a supply voltage of 5V.The LED driving board is mounted in the way of Surface Mount.There are 6 pins in total on this board.In this LED driving board, there is 80mOhm resistance.This results in a 2.3A output current.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.Vsup (maximum supply voltage) is set to 5.5V.The power supply of the part is 2/5V.
SIP4280ADT-3-T1-E3 Features
Supplied from 5V
Resistance of 80mOhm
SIP4280ADT-3-T1-E3 Applications
There are a lot of Vishay Siliconix SIP4280ADT-3-T1-E3 Power Switches ICs applications.
- Telecom and Network Systems
- Notebook PC
- Wireless Modem Data Cards
- Portable Music Players
- HDD, SSD
- PDAs
- Mobile Communication Devices
- USB3.1 Power Delivery
- Storage (HDDs, SSDs)
- Portable GPS Device
