SIP4280DT-1-T1-E3
| Parameters | |
|---|---|
| ECCN Code | EAR99 |
| Resistance | 80mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 440mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 10 |
| Base Part Number | SIP4280 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Power Supplies | 2/5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Power Dissipation | 440mW |
| Output Current | 2.3A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.8V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | UVLO |
| Rds On (Typ) | 80m Ω |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 6 |
| Weight | 36.003894mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2017 |
| JESD-609 Code | e3 |
| Feature | Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
SIP4280DT-1-T1-E3 Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).There is a SOT-23-6 Thin, TSOT-23-6 package that includes it.Mounting type Surface Mount is selected for the LED driving board.This switch is of type General Purpose.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.The LED driver has 1 outputs.Operation is based on Not Required supply voltage.The maximum output voltage of this LED driver is P-Channel volts.The lighting driver has Slew Rate Controlled features.It comes under the family of SIP4280.A total of 6 terminations have been found in it.The 6 pins are used to operate the LED driver.In this case, it is mounted in the way of Surface Mount.The LED driver has a total of 6 pins.80mOhm resistance is present in the lighting driver.The output current is set to 2.3A in this case.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.This part is powered by 2/5V.
SIP4280DT-1-T1-E3 Features
Resistance of 80mOhm
SIP4280DT-1-T1-E3 Applications
There are a lot of Vishay Siliconix SIP4280DT-1-T1-E3 Power Switches ICs applications.
- Telecom and Network Systems
- Hot Swap
- PDAs
- Portable Video Game Players
- USB Power Distribution
- Low Voltage I/O System Power
- Gaming
- Wireless Headsets
- Smart Phones, Feature Phones
- Wireless Modem Data Cards
