SIP4280DT-3-T1-E3
| Parameters | |
|---|---|
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 80mOhm |
| Terminal Finish | MATTE TIN |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 440mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 10 |
| Base Part Number | SIP4280 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Power Supplies | 2/5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Power Dissipation | 440mW |
| Output Current | 2.3A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 40 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 10 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.8V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | UVLO |
| Rds On (Typ) | 80m Ω |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 6 |
| Weight | 36.003894mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
SIP4280DT-3-T1-E3 Overview
The package is in the form of a Tape & Reel (TR).There is a SOT-23-6 Thin, TSOT-23-6 package that includes it.Mounting type Surface Mount is selected for the LED driving board.It owns General Purpose switch type.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.As a default, the output is set to 1.Operation is based on Not Required supply voltage.It has a maximum output voltage of P-Channel volts.There are Load Discharge, Slew Rate Controlled features available on the LED driving board.This object belongs to the SIP4280 family.The termination count is 6.During operation, the 6 pins are used.Surface Mount is mounted in the way of this LED driving board.6 pins are connected to it in total.Currently, the LED driving board has a resistance of 80mOhm ohms.This case has the output current set to 2.3A.It is self-contained in an econtainer with a capacity of Peripheral Drivers.A 2/5V power supply is used by the part.
SIP4280DT-3-T1-E3 Features
Resistance of 80mOhm
SIP4280DT-3-T1-E3 Applications
There are a lot of Vishay Siliconix SIP4280DT-3-T1-E3 Power Switches ICs applications.
- USB Power Distribution
- HDD, SSD
- Set-Top Boxes
- Solid-State Drives
- Portable/Handheld Devices
- Wearable Devices
- PC Card Hot Swap
- Hot-Swap Systems
- Storage (HDDs, SSDs)
- Solid State Drivers
