SIP4282ADNP2-T1GE4
| Parameters | |
|---|---|
| Switch Type | General Purpose |
| Turn-Off Delay Time | 4 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.5V~5.5V |
| Driver Number of Bits | 1 |
| Rds On (Typ) | 350m Ω |
| Output Current Flow Direction | SOURCE |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-UFDFN Exposed Pad |
| Number of Pins | 4 |
| Weight | 50.008559mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e4 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 520mOhm |
| Terminal Finish | PALLADIUM GOLD OVER NICKEL |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 324mW |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | P-Channel |
| Max Output Current | 1.4A |
| Power Supplies | 2/5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 μs |
SIP4282ADNP2-T1GE4 Overview
As a result, it is packaged in the form of a Tape & Reel (TR).The 4-UFDFN Exposed Pad package contains it.This LED driving board is mounted using the mounting type Surface Mount.This switch is of type General Purpose.To ensure reliable performance, the temperature should be set to -40°C~125°C TJ.The LED driver has a total of 1 outputs.Operation is based on Not Required supply voltage.A maximum voltage of P-Channel volts is available from the output of this LED driver.Currently, the LED driving board is equipped with Load Discharge, Slew Rate Controlled features.A total of 4 terminations have been found in it.For operation, we use the 4 pins.This operation requires the maximum output current to be decreased to 1.4A.It is positioned in the direction of Surface Mount.A total of 4 pins are included in this LED driver.In this LED driving board, there is 520mOhm resistance.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.The power supply of the part is 2/5V.
SIP4282ADNP2-T1GE4 Features
Resistance of 520mOhm
SIP4282ADNP2-T1GE4 Applications
There are a lot of Vishay Siliconix SIP4282ADNP2-T1GE4 Power Switches ICs applications.
- Portable Video Game Players
- Hot Swaps
- Wireless Modem Data Cards
- Storage (HDDs, SSDs)
- HDD, SSD
- Portable Music Players
- Gaming
- Set-top-box
- Telecom and Network Systems
- Smart Phones, Feature Phones
