SIP4282ADNP3-T1GE4
| Parameters | |
|---|---|
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | P-Channel |
| Max Output Current | 1.4A |
| Power Supplies | 2/5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Power Dissipation | 324mW |
| Output Current | 1.2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 4 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.5V~5.5V |
| Driver Number of Bits | 1 |
| Rds On (Typ) | 350m Ω |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-UFDFN Exposed Pad |
| Number of Pins | 4 |
| Weight | 50.008559mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 520mOhm |
| Terminal Finish | Palladium/Gold (Pd/Au) - with Nickel (Ni) barrier |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 324mW |
| Technology | MOS |
SIP4282ADNP3-T1GE4 Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).There is a 4-UFDFN Exposed Pad package that includes it.It has been mounted as Surface Mount on the LED driver.It owns General Purpose switch type.It is best to set the temperature to -40°C~125°C TJ to ensure reliable operation.There is a default setting of 1 for output.The LED driving board operates at Not Required volts.Voltage output is P-Channel volts at maximum.Features of the lighting driver are Load Discharge, Slew Rate Controlled.As a result, there are 4 terminations.In order to operate, the 4 pins are used.To meet the operation criteria, the maximum output current drops to 1.4A.The LED driving board is mounted in the way of Surface Mount.In total, it has 4 pins.Lighting drivers with 520mOhm resistance are used.This case results in a 1.2A output current.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.In this case, the power supply is 2/5V.
SIP4282ADNP3-T1GE4 Features
Resistance of 520mOhm
SIP4282ADNP3-T1GE4 Applications
There are a lot of Vishay Siliconix SIP4282ADNP3-T1GE4 Power Switches ICs applications.
- Storage Drives
- Solid State Drivers
- HDD, SSD
- PC Cards
- Wireless Headsets
- Solid-State Drives
- Portable/Handheld Devices
- Smart Phones, Feature Phones
- Smartphone and PDA
- Hard Disk Drives
