SIP4282ADVP-3-E3
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerPAK® SC-75-6L |
| Number of Pins | 6 |
| Weight | 95.991485mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| JESD-609 Code | e3 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 350mOhm |
| Terminal Finish | MATTE TIN |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 610mW |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | SIP4282A |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 1.4A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Output Current | 0A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.5V~5.5V |
| Driver Number of Bits | 1 |
| Turn On Time | 40 μs |
| Rds On (Typ) | 350m Ω |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
SIP4282ADVP-3-E3 Overview
The package is in the form of a Tape & Reel (TR).This file is included in package PowerPAK? SC-75-6L.The lighting driver has the mounting type Surface Mount.General Purpose is the switch type it owns.It is recommended that the temperature be set to -40°C~125°C TJ for reliable performance.The LED driver has 1 outputs.Operation is based on a supply voltage of Not Required.There is a maximum output voltage of P-Channel volts.It has a total of Load Discharge, Slew Rate Controlled features.It comes under the family of SIP4282A.A total of 6 terminations have been recorded.In order to operate, 6 pins are used.There are 1 functions of the LED driver.This results in the maximum output current dropping to 1.4A to meet the operation criteria.High efficiency is possible at 5V supply voltage.As a result, it is mounted in the manner of Surface Mount.6 pins are connected to it in total.It has 350mOhm resistance.When this case is used, the output current is set to 0A.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.This LED driver is configured to have a maximum supply voltage of 5.5V (Vsup).In this part, the power supply is set to 2/5V.
SIP4282ADVP-3-E3 Features
Supplied from 5V
Resistance of 350mOhm
SIP4282ADVP-3-E3 Applications
There are a lot of Vishay Siliconix SIP4282ADVP-3-E3 Power Switches ICs applications.
- Hot Swaps
- HDD and SSD
- Low Voltage I/O System Power
- Notebook and Tablet Computers
- Wireless Headsets
- USB Protection
- Set-top-box
- PC Card Hot Swap
- PDAs
- Hot Swap
