SIP4282ADVP2-T1GE3
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerPAK® SC-75-6L |
| Number of Pins | 6 |
| Weight | 95.991485mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| JESD-609 Code | e3 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 520mOhm |
| Terminal Finish | PURE MATTE TIN |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 610mW |
| Technology | MOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 1.4A |
| Power Supplies | 2/5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 4 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.5V~5.5V |
| Driver Number of Bits | 1 |
| Rds On (Typ) | 350m Ω |
| Output Current Flow Direction | SOURCE |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
SIP4282ADVP2-T1GE3 Overview
It is packaged in the manner of a Tape & Reel (TR).Package PowerPAK? SC-75-6L contains it.The lighting driver is mounted in the Surface Mount position.It owns General Purpose switch type.To ensure reliable operation, the temperature should be set to -40°C~125°C TJ.There is a default setting of 1 for output.It uses a supply voltage of Not Required to operate.Voltage output is P-Channel volts at maximum.A lighting driver with Load Discharge, Slew Rate Controlled features is available.A total of 6 terminations have been found in it.The 6 pins are used to operate the LED driver.It is necessary to reduce the maximum output current to 1.4A to meet the operation criteria.The LED driving board is mounted in the way of Surface Mount.The LED driver has a total of 6 pins.In this case, there is 520mOhm resistance in the LED driving board.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.This part has a power supply of 2/5V volts.
SIP4282ADVP2-T1GE3 Features
Resistance of 520mOhm
SIP4282ADVP2-T1GE3 Applications
There are a lot of Vishay Siliconix SIP4282ADVP2-T1GE3 Power Switches ICs applications.
- Mobile Communication Devices
- Low Voltage I/O System Power
- Hot Swaps
- Storage Drives
- Set-Top Boxes
- Portable GPS
- Portable GPS Device
- Portable Video Game Players
- Portable Music Players
- Solid-State Drives
