SIP4282DVP-3-T1-E3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerPAK® SC-75-6L |
| Number of Pins | 6 |
| Weight | 95.991485mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| JESD-609 Code | e3 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 105mOhm |
| Terminal Finish | MATTE TIN |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 610mW |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | SIP4282 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 3A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Interface | On/Off |
| Current - Output (Max) | 1.4A |
| Output Configuration | High Side |
| Output Current | 1.2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 1.2A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.8V~5.5V |
| Driver Number of Bits | 1 |
| Rds On (Typ) | 105m Ω |
| Turn Off Time | 40 μs |
| Built-in Protections | TRANSIENT; UNDER VOLTAGE |
| Height Seated (Max) | 0.8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
SIP4282DVP-3-T1-E3 Overview
Tape & Reel (TR) is how it's packaged.The PowerPAK? SC-75-6L package includes it.Mounting type Surface Mount is selected for the LED driving board.There is a switch type of General Purpose.To ensure reliable operation, set the temperature to -40°C~125°C TJ.The lighting driver is equipped with 1 outputs that can be used.To operate, it needs a supply voltage of Not Required.There is a maximum output voltage of P-Channel volts.This LED driving board is equipped with Load Discharge, Slew Rate Controlled features in order for it to be useful.The SIP4282 family contains this object.There are 6 terminations in it.The operation is carried out using the 6 pins.As far as functions are concerned, the lighting driver has 1.The LED driver output is limited to 1.4AV.The maximum output current must drop to 3A to meet the operation criteria.Using a voltage of 5V allows for high efficiency.Surface Mount is mounted in the way of this lighting driver.6 pins are connected to it in total.There is 105mOhm resistance on the LED driver.This case has the output current set to 1.2A.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.The LED driver is configured with a maximum supply voltage of 5.5V (Vsup).In this case, the power supply is 2/5V.
SIP4282DVP-3-T1-E3 Features
Supplied from 5V
Resistance of 105mOhm
SIP4282DVP-3-T1-E3 Applications
There are a lot of Vishay Siliconix SIP4282DVP-3-T1-E3 Power Switches ICs applications.
- HDD and SSD
- PC Cards
- Hot Swap
- Storage (HDDs, SSDs)
- Hot-Swap Systems
- Wireless Headsets
- Portable Devices
- Set-Top Boxes
- Handheld Devices
- Smartphone and PDA
