SIP4282DVP3-T1GE3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerPAK® SC-75-6L |
| Number of Pins | 6 |
| Weight | 95.991485mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 480mOhm |
| Terminal Finish | Pure Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 610mW |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | P-Channel |
| Max Output Current | 1.4A |
| Power Supplies | 2/5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Power Dissipation | 610mW |
| Output Current | 1.2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 4 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.8V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | UVLO |
| Rds On (Typ) | 105m Ω |
| RoHS Status | ROHS3 Compliant |
SIP4282DVP3-T1GE3 Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).The PowerPAK? SC-75-6L package includes it.The LED driver is mounted as Surface Mount.It owns the General Purpose switch type.To ensure reliable performance, the temperature should be set to -40°C~125°C TJ.It is possible to use 1 outputs in the lighting driver.It uses a supply voltage of Not Required to operate.There is a maximum output voltage of P-Channel volts.It has a total of Load Discharge, Slew Rate Controlled features.In total, there are 6 terminations.It is necessary to use the 6 pins in order to operate the LED driver.The maximum output current drops to 1.4A in order to meet the operation criteria.The LED driving board is mounted in the way of Surface Mount.There are 6 pins in total on this board.Lighting drivers with 480mOhm resistance are used.This case has the output current set to 1.2A.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.In this part, the power supply is set to 2/5V.
SIP4282DVP3-T1GE3 Features
Resistance of 480mOhm
SIP4282DVP3-T1GE3 Applications
There are a lot of Vishay Siliconix SIP4282DVP3-T1GE3 Power Switches ICs applications.
- Wearable Devices
- USB Protection
- USB3.1 Power Delivery
- Solid-State Drives
- Wireless Modem Data Cards
- Portable GPS
- Wireless Headsets
- Portable/Handheld Devices
- Set-Top Boxes
- Low Voltage I/O System Power
