SIP43101DLP-T1-E3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerPAK® MLP44-16 |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 850mW |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 25V |
| Terminal Pitch | 0.65mm |
| Current Rating | 200mA |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | SIP43101 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Output Type | Bipolar |
| Max Output Current | 200mA |
| Supply Voltage-Min (Vsup) | 9V |
| Interface | On/Off |
| Nominal Supply Current | 6mA |
| Output Configuration | High Side or Low Side |
| Power Dissipation | 850mW |
| Output Current | 200mA |
| Input Type | Inverting, Non-Inverting |
| Switch Type | General Purpose |
| Clamping Voltage | 52V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 9V~32V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 1.1A |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 1mm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SIP43101DLP-T1-E3 Overview
The package is in the form of a Tape & Reel (TR).It is included with the PowerPAK? MLP44-16 package as well.The lighting driver has the mounting type Surface Mount.General Purpose is the switch type it owns.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.The LED driver has 2 outputs.There is a maximum output voltage of Bipolar volts on this LED driver.It is a member of the SIP43101 family.A total of 16 terminations have been found in it.For operation, we use the 16 pins.The LED driving board has a total of 1 functions.To meet the operation criteria, the maximum output current drops to 200mA.High efficiency is possible at 25V supply voltage.In this case, it is mounted in the way of Surface Mount.16 pins are equipped with it.This case has the output current set to 200mA.For normal operation, the supply voltage (Vsup) must be kept above 9V.
SIP43101DLP-T1-E3 Features
Supplied from 25V
SIP43101DLP-T1-E3 Applications
There are a lot of Vishay Siliconix SIP43101DLP-T1-E3 Power Switches ICs applications.
- PC Card Hot Swap
- Telecom and Network Systems
- Wireless/Networking Cards
- USB Protection
- HDD, SSD
- Hot-Swap Systems
- USB Power Distribution
- Wearable Devices
- USB3.1 Power Delivery
- Smartphone and PDA
