SIP43102DQ-T1-E3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-TSSOP |
| Weight | 172.98879mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 440mW |
| Base Part Number | SIP43102 |
| Number of Outputs | 2 |
| Output Type | Bipolar |
| Max Output Current | 200mA |
| Interface | On/Off |
| Current - Output (Max) | 200mA |
| Nominal Supply Current | 6mA |
| Output Configuration | High Side or Low Side |
| Power Dissipation | 440mW |
| Output Current | 200mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 9V~32V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
SIP43102DQ-T1-E3 Overview
The package is in the form of a Tape & Reel (TR).It is included with the 16-TSSOP (0.173, 4.40mm Width) package as well.The lighting driver is mounted in the Surface Mount position.A General Purpose switch type is owned by it.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.There are 2 outputs available on this lighting driver.A maximum output voltage of Bipolar volts can be obtained with this LED driver.The SIP43102 family contains this object.In order to operate, the 16 pins are used.In this case, the LED driving board can produce only 200mAV as its maximum output.It is necessary to reduce the maximum output current to 200mA to meet the operation criteria.In this case, it is mounted in the way of Surface Mount.In this case, the output current is set to 200mA.For stable operation, the maximum operating temperature should be 85°C°C.Ensure reliability by operating at a minimum temperature of -40°C degrees Celsius.
SIP43102DQ-T1-E3 Features
SIP43102DQ-T1-E3 Applications
There are a lot of Vishay Siliconix SIP43102DQ-T1-E3 Power Switches ICs applications.
- Wireless/Networking Cards
- Hot Swap
- Various applications equipped with buttons
- PC Cards
- USB3.1 Power Delivery
- PC Card Hot Swap
- Wireless Modem Data Cards
- Wearable Devices
- Low Voltage I/O System Power
- Handheld Devices
