SIP4610ADT-T1-E3
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Number of Pins | 5 |
| Weight | 29.993795mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 190mOhm |
| Terminal Finish | MATTE TIN |
| Max Power Dissipation | 305mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | SIP4610 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 1A |
| Supply Voltage-Min (Vsup) | 2.4V |
| Interface | On/Off |
| Output Configuration | High Side |
| Power Dissipation | 305mW |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.4V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Turn On Time | 200 μs |
| Output Peak Current Limit-Nom | 1A |
| Rds On (Typ) | 145m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
SIP4610ADT-T1-E3 Overview
It is packaged in the manner of a Tape & Reel (TR).The SOT-23-5 Thin, TSOT-23-5 package includes it.The lighting driver has the mounting type Surface Mount.This switch is of type General Purpose.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.The LED driver has a total of 1 outputs.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of P-Channel volts can be obtained with this LED driver.The SIP4610 family contains this object.A total of 5 terminations have been found in it.For operation, we use the 5 pins.It consists of 1 functions.It is necessary to reduce the maximum output current to 1A to meet the operation criteria.High efficiency is possible when the supply voltage is set to 5V.Surface Mount is mounted in the way of this LED driving board.5 pins are connected to it in total.190mOhm is the resistance of the lighting driver.The output current is set to 1A in this case.In order to operate normally, the supply voltage (Vsup) must remain above 2.4V.
SIP4610ADT-T1-E3 Features
Supplied from 5V
Resistance of 190mOhm
SIP4610ADT-T1-E3 Applications
There are a lot of Vishay Siliconix SIP4610ADT-T1-E3 Power Switches ICs applications.
- Solid State Drivers
- Portable Music Players
- Wireless Headsets
- USB Ports/Hubs
- Notebook PC
- Wearable Devices
- PDAs
- HDD, SSD
- USB Protection
- Hot-Swap Systems
