SIP4610BDT-T1-E3
| Parameters | |
|---|---|
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | SIP4610 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | P-Channel |
| Max Output Current | 2A |
| Supply Voltage-Min (Vsup) | 2.4V |
| Interface | On/Off |
| Output Configuration | High Side |
| Power Dissipation | 305mW |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 1A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.4V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Turn On Time | 200 μs |
| Output Peak Current Limit-Nom | 1A |
| Rds On (Typ) | 145m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 145mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 305mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Current Rating | 1.25A |
SIP4610BDT-T1-E3 Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).This package is included in SOT-23-5 Thin, TSOT-23-5.The mounting type of the LED driver is Surface Mount.There is a switch type of General Purpose.To ensure reliable operation, set the temperature to -40°C~85°C TA.In this LED driver, there are no outputs available.Operation is based on a supply voltage of Not Required.There is a maximum output voltage of P-Channel volts.I believe it belongs to the SIP4610 family.It consists of 5 terminations in total.In order to operate, the 5 pins are used.The LED driving board has a total of 1 functions.The maximum output current must drop to 2A to meet the operation criteria.As long as the supply voltage is 5V, high efficiency can be achieved.The LED driving board is mounted in the way of Surface Mount.As a result, it has a total of 5 pins.There is 145mOhm resistance on the LED driver.This case has the output current set to 1A.For normal operation, the supply voltage (Vsup) must be kept above 2.4V.
SIP4610BDT-T1-E3 Features
Supplied from 5V
Resistance of 145mOhm
SIP4610BDT-T1-E3 Applications
There are a lot of Vishay Siliconix SIP4610BDT-T1-E3 Power Switches ICs applications.
- Hot Swaps
- Set-Top Boxes
- Portable GPS Device
- Hot-Swap Systems
- Portable GPS
- Hard Disk Drives
- Notebook PC
- USB Power Distribution
- Telecom and Network Systems
- Set-top-box
