SIP4612ADVP-T1-E3
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerPAK® TSC-75-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 180mOhm |
| Terminal Finish | MATTE TIN |
| Max Power Dissipation | 420mW |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | SIP4612 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Supply Voltage-Min (Vsup) | 2.4V |
| Interface | On/Off |
| Output Configuration | High Side |
| Power Dissipation | 420mW |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 55 μs |
| Switch Type | General Purpose |
| Drain to Source Voltage (Vdss) | 5.5V |
| Turn-Off Delay Time | 500 ns |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.4V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 0.5A |
| Rds On (Typ) | 150m Ω |
| Drain to Source Resistance | 250MOhm |
| Built-in Protections | TRANSIENT; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 0.8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SIP4612ADVP-T1-E3 Overview
It is package in Tape & Reel (TR) case.It is included in the package PowerPAK? TSC-75-6.The lighting driver has the mounting type Surface Mount.General Purpose is the type of switch owned by it.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.In this LED driver, there are no outputs available.To operate, it needs a supply voltage of Not Required.The maximum output voltage of this LED driver is P-Channel volts.There is a SIP4612 family of things that it belongs to.It has a total of 6 terminations.The 6 pins are used to operate the LED driver.It consists of 1 functions.A supply voltage of 5V leads to high efficiency.It is positioned in the direction of Surface Mount.6 pins are connected to it in total.180mOhm resistance is present in the lighting driver.This case has the output current set to 1A.A normal operation requires that the supply voltage (Vsup) remain above 2.4V.
SIP4612ADVP-T1-E3 Features
Supplied from 5V
Resistance of 180mOhm
SIP4612ADVP-T1-E3 Applications
There are a lot of Vishay Siliconix SIP4612ADVP-T1-E3 Power Switches ICs applications.
- HDD, SSD
- PC Cards
- Notebook and Tablet Computers
- Solid State Drivers
- USB Protection
- Various applications equipped with buttons
- Portable Music Players
- Hot Swaps
- USB Power Distribution
- Set-top-box
