SIP4612BDVP-T1-E3
| Parameters | |
|---|---|
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 1A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.4V |
| Interface | On/Off |
| Output Configuration | High Side |
| Power Dissipation | 420mW |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 55 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 500 ns |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.4V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 0.5A |
| Rds On (Typ) | 150m Ω |
| Built-in Protections | TRANSIENT; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 0.8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerPAK® TSC-75-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 180mOhm |
| Terminal Finish | MATTE TIN |
| Max Power Dissipation | 420mW |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
SIP4612BDVP-T1-E3 Overview
It is package in Tape & Reel (TR) case.The PowerPAK? TSC-75-6 package includes it.The lighting driver has the mounting type Surface Mount.This switch is of type General Purpose.Keeping the temperature at -40°C~85°C TA ensures reliable operation.There is a default setting of 1 for output.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of P-Channel volts can be obtained with this LED driver.In total, there are 6 terminations.The operation is performed through the 6 pins.Currently, the lighting driver has a total of 1 functions.As a result, the maximum output current is reduced to 1A in order to meet the operation requirements.With a supply voltage of 5V, high efficiency is possible.In this case, it is mounted in the way of Surface Mount.6 pins are equipped with it.There is 180mOhm resistance on the LED driver.In this case, the output current will be set to 1A.The maximum supply voltage is set to 5.5V.Normal operation requires Vsup above 2.4V.
SIP4612BDVP-T1-E3 Features
Supplied from 5V
Resistance of 180mOhm
SIP4612BDVP-T1-E3 Applications
There are a lot of Vishay Siliconix SIP4612BDVP-T1-E3 Power Switches ICs applications.
- Storage Drives
- USB Power Distribution
- USB3.1 Power Delivery
- Storage (HDDs, SSDs)
- Wireless/Networking Cards
- USB Ports/Hubs
- Hard Disk Drives
- Wearable Devices
- Portable Music Players
- Wireless Modem Data Cards
