banner_page

SL23EP08ZC-1H

2.5V 220MHz SL23EP08 Clock Generators 16 Pins 16-TSSOP (0.173, 4.40mm Width) 16 Terminals Surface Mount 2.3V~3.6V Tube


  • Manufacturer: Silicon Labs
  • Nocochips NO: 715-SL23EP08ZC-1H
  • Package: 16-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 622
  • Description: 2.5V 220MHz SL23EP08 Clock Generators 16 Pins 16-TSSOP (0.173, 4.40mm Width) 16 Terminals Surface Mount 2.3V~3.6V Tube (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mounting Type Surface Mount
Package / Case 16-TSSOP (0.173, 4.40mm Width)
Surface Mount YES
Number of Pins 16
Weight 50.008559mg
Operating Temperature 0°C~70°C
Packaging Tube
Published 2011
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 16
Additional Feature ALSO OPERATES WITH 3.3V SUPPLY
Voltage - Supply 2.3V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) NOT SPECIFIED
Number of Functions 2
Supply Voltage 2.5V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number SL23EP08
Output LVCMOS
Pin Count 16
Number of Outputs 8
Qualification Status Not Qualified
Supply Voltage-Max (Vsup) 2.7V
Supply Voltage-Min (Vsup) 2.3V
Number of Circuits 1
Frequency (Max) 220MHz
Input Clock
Ratio - Input:Output 1:9
PLL Yes with Bypass
Differential - Input:Output No/No
Divider/Multiplier Yes/Yes
fmax-Min 220 MHz
Same Edge Skew-Max (tskwd) 0.5 ns
Length 4.4mm
Width 3mm
RoHS Status RoHS Compliant

SL23EP08ZC-1H Overview


As a clock IC, PLLs is packaged using the Tube method. The 16-TSSOP (0.173, 4.40mm Width) package contains this clock generator. When reflowed, this frequency generator can withstand a maximum temperature of NOT SPECIFIED. There are 16 terminations found in the file. For this clock generator ic, a voltage of 2.5V is required. In this clock generator, Clock is used as the input to the clock. 1 circuits are used to achieve clock PLL's superior flexibility. The frequency generator has a maximum frequency of 220MHz. The Surface Mount allows this electrical component to be easily installed on the panel. It would be possible to supply this clock PLL with 2.7V of power. The supply voltage (Vsup) should be kept above 2.3V for normal operation. There should be 2.3V~3.6V provided with this RF synthesizer. Statistics suggest that the ambient temperature be set at 0°C~70°C, which is what is estimated by the test. This is a clock generator compatible with LVCMOS logic levels. It is a 16-bit IC that is designed for microprocessors specifically. These related electrical parts are available for the base part number SL23EP08. PF synthesizers is equipped with 16 pins. This clock PLL features ALSO OPERATES WITH 3.3V SUPPLY for better clock signal output. Clock PLL is facilitated with 8 signal outputs to magnify output frequency as high as possible. At 0.5 ns Max, this analog clock generator exhibits low timing skew.

SL23EP08ZC-1H Features


Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 2.5V

SL23EP08ZC-1H Applications


There are a lot of Silicon Labs SL23EP08ZC-1H Clock Generators applications.

  • Radio receivers
  • FSK demodulators
  • Quenching?
  • High-speed communication applications
  • Mechanical devices
  • Broadcast communication
  • Jitter reduction
  • High-frequency induction heating
  • Microwave point-to-point systems
  • Peripheral devices

Write a review

Note: HTML is not translated!
    Bad           Good