SM30PRLQD
| Parameters | |
|---|---|
| Number of Pins | 4 |
| Housing Material | Plastic |
| Operating Temperature | -40°C~70°C |
| Packaging | Bulk |
| Published | 2011 |
| Series | SM30 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Voltage - Supply | 10V~30V |
| Ingress Protection | IP67, NEMA 6P |
| Output Configuration | NPN/PNP - Dark-ON/Light-ON |
| Output Current | 250mA |
| Sensing Distance | 492.13' (150m) |
| Sensing Method | Reflective |
| Max Supply Voltage (DC) | 30V |
| Connection Method | Connector |
| Light Source | Infrared (880nm) |
| Min Supply Voltage (DC) | 10V |
| RoHS Status | ROHS3 Compliant |
| Ratings | IP67 |
SM30PRLQD Overview
In order for the photoelectric sensor to work reliably, it should be set to -40°C~70°C degrees Celsius. To make these electronic components work, they should be supplied with 10V~30V voltage. To make the photoelectric sensor work properly, 4 pins must be connected. It is required that the output current of a photoelectric sensor be 250mA. It is possible to apply the maximum voltage of 30V to the photoelectric sensor without damaging it in a DC circuit. It can work at 0V, which is the lowest voltage possible for this type of sensor. A Bulk package contains the sensor.
SM30PRLQD Features
Sensing Distance: 492.13' (150m)
4 pins
Operating Temperature: -40°C~70°C
SM30 Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
SM30PRLQD Applications
There are a lot of Banner Engineering Corporation SM30PRLQD Photoelectric Sensors applications.
- Measuring distance
- Zone scanners
- Pharmaceutical industry
- Material handling
- Logistics and materials handling
- detect objects
- Monitoring bigger areas for objects with light grids
- Detecting colours
- Mechanical engineering
- Automotive industry
