SM312FVQD
| Parameters | |
|---|---|
| Number of Pins | 4 |
| Housing Material | PBT |
| Operating Temperature | -20°C~70°C |
| Published | 2012 |
| Series | MINI-BEAM® |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Voltage - Supply | 10V~30V |
| Ingress Protection | NEMA 1, 2, 3, 3S, 4, 4X, 6, 12, IEC IP67 |
| Depth | 12.2mm |
| Operating Supply Voltage | 30V |
| Output Configuration | NPN/PNP |
| Response Time | 1ms |
| Adjustment Type | Adjustable, Potentiometer |
| Sensing Method | Fiber Optic |
| Connection Method | Connector |
| Light Source | Red (650nm) |
| Length | 57.5mm |
| Width | 30.7mm |
| RoHS Status | ROHS3 Compliant |
| Ratings | IP67 |
SM312FVQD Overview
To make sure your photoelectric sensor is reliable, set its temperature to -20°C~70°C. If these electronic components are to work, they should receive 10V~30V voltage into the circuit or system. Ideally, photoelectric sensors should respond within 1ms. The photoelectric sensor must be connected to 4 pins in order to function properly. Photoelectric sensors should have their supply voltage set to zero for optimum efficiency.
SM312FVQD Features
4 pins
Response Time: 1ms
Operating Temperature: -20°C~70°C
MINI-BEAM? Series
SM312FVQD Applications
There are a lot of Banner Engineering Corporation SM312FVQD Photoelectric Sensors applications.
- detect objects
- Contrast sensors
- Mechanical engineering
- Counting small objects
- Automotive industry
- Zone scanners
- Logistics and materials handling
- Pharmaceutical industry
- Passive infrared sensors
- Material handling
