SM312LVAGQD
| Parameters | |
|---|---|
| Number of Pins | 4 |
| Housing Material | Polyester |
| Operating Temperature | -20°C~70°C |
| Published | 2001 |
| Series | MINI-BEAM® |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Voltage - Supply | 10V~30V |
| Ingress Protection | NEMA 1, 2, 3, 3S, 4, 4X, 6, 12, IEC IP67 |
| Output Configuration | NPN/PNP - Dark-ON/Light-ON |
| Output Current | 150mA |
| Response Time | 1ms |
| Adjustment Type | Adjustable, Potentiometer |
| Sensing Distance | 78.740 (2m) |
| Sensing Method | Retroreflective, Polarized |
| Max Supply Voltage (DC) | 30V |
| Connection Method | Connector |
| Light Source | Red LED |
| Min Supply Voltage (DC) | 10V |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Ratings | IP67 |
SM312LVAGQD Overview
The temperature of photoelectric sensor should be set to -20°C~70°C to ensure reliable performance. Into a circuit or system, these electronic components must be given 10V~30V voltage. Photoelectric sensors are considered to have an optimal response time of 1ms. The photoelectric sensor must be connected to 4 pins in order to function properly. At the output, the photoelectric sensor should have a current of 150mA. In a DC circuit, you can apply a voltage of 30V without damaging the photoelectric sensor. In this photoelectric sensor, the voltage can be as low as possible, such as 0 volts.
SM312LVAGQD Features
Sensing Distance: 78.740 (2m)
4 pins
Response Time: 1ms
Operating Temperature: -20°C~70°C
MINI-BEAM? Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
SM312LVAGQD Applications
There are a lot of Banner Engineering Corporation SM312LVAGQD Photoelectric Sensors applications.
- Luminescence sensors
- Contrast sensors
- Entrance and gate
- detect objects
- Counting small objects
- Checking objects on production lines or conveyors
- Measuring distance
- Mechanical engineering
- Detecting colours
- Automatic doors
