SM312LVQDP
| Parameters | |
|---|---|
| Number of Pins | 4 |
| Housing Material | Polyester |
| Operating Temperature | -20°C~70°C |
| Published | 2012 |
| Series | MINI-BEAM® |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Voltage - Supply | 10V~30V |
| Ingress Protection | NEMA 1, 2, 3, 3S, 4, 4X, 6, 12, IEC IP67 |
| Output Configuration | NPN/PNP - Dark-ON/Light-ON |
| Output Current | 150mA |
| Response Time | 1ms |
| Adjustment Type | Adjustable, Potentiometer |
| Sensing Distance | 196.850 (5m) |
| Sensing Method | Retroreflective, NonPolarized |
| Max Supply Voltage (DC) | 30V |
| Connection Method | Connector |
| Light Source | Red LED |
| Min Supply Voltage (DC) | 10V |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Ratings | IP67 |
SM312LVQDP Overview
Ensure reliable performance by setting the photoelectric sensor's temperature to -20°C~70°C. If these electronic components are to work, they should receive 10V~30V voltage into the circuit or system. An ideal response time for photoelectric sensors is 1ms. The photoelectric sensor must have the 4 pins connected to work properly. In order to operate, photoelectric sensor should have a current of 150mA at the output. It is possible to apply the maximum voltage of 30V to the photoelectric sensor without damaging it in a DC circuit. Ideally, this photoelectric sensor should operate at a low voltage, such as 0V.
SM312LVQDP Features
Sensing Distance: 196.850 (5m)
4 pins
Response Time: 1ms
Operating Temperature: -20°C~70°C
MINI-BEAM? Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
SM312LVQDP Applications
There are a lot of Banner Engineering Corporation SM312LVQDP Photoelectric Sensors applications.
- detect objects
- Automatic doors
- Zone scanners
- Measuring distance
- Monitoring bigger areas for objects with light grids
- Pharmaceutical industry
- Passive infrared sensors
- Contrast sensors
- Entrance and gate
- Detecting colours
