SM320C32PCMM50EP
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 144-BQFP |
| Number of Pins | 144 |
| Operating Temperature | -55°C~125°C TC |
| Packaging | Tray |
| Series | TMS320C3x |
| JESD-609 Code | e4 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 144 |
| ECCN Code | 3A001.A.2.C |
| Type | Floating Point |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 320C32 |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | Serial Port |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| RAM Size | 2kB |
| Supply Current-Max | 475mA |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Integrated Cache | YES |
| RAM (words) | 512 |
| Voltage - I/O | 5.00V |
| Number of Timers | 2 |
| Number of External Interrupts | 4 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | External |
| On Chip Data RAM | 2.25kB |
| Number of DMA Channels | 2 |
| Height | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| Thickness | 3.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SM320C32PCMM50EP Overview
Basically, it is a type of electronic component that is available in a 144-BQFP package.There is a packaging method of Tray provided with it.Due to its membership in Floating Point, it is ideally suited for a wide range of uses.The mounting is carried out in the direction of Surface Mount.By operating the device at the temperature of -55°C~125°C TC, a normal operation is ensured.In analog circuits, the analog voltage range 5.00V represents the voltage range that is available for input or output.This digital signal processor is included into the TMS320C3x series.In order to use it, it has 144 terminations.A voltage of 5V is used as the supply voltage.The 144 component has pins.An overview of its configuration can be found in the section on 144 pins.There are a number of related parts that can be identified using the base part number 320C32.The device is specifically designed to operate at the frequency of 50MHz.Mounting is accomplished using Surface Mount.According to its specific characteristics, this device is classified in the subcategory Digital Signal Processors.In this device, the minimum voltage is 4.75V.A maximum voltage of 5.25V can be provided to this device.A supply voltage of 5V is required for its operation.The electric power supply is 5V.Industrial environments have 2 timers that provide accurate feedback and trigger events.A source external to the system causes 4 interrupts.There are 2 DMA channels used to transfer data without exposing the CPU to a work overload.
SM320C32PCMM50EP Features
Supplied in the 144-BQFP package
Operating supply voltage of 5V
4 external interrupts
SM320C32PCMM50EP Applications
There are a lot of Texas Instruments SM320C32PCMM50EP DSP applications.
- Speech processing
- Remote sensing image processing technology
- Audio signal
- Boats
- Finite impulse response digital filters
- Tomography technology
- Automatic analysis system of EEG or ECG
- Digital camera
- Audio synthesis
- TVs
