SM73201IMME/NOPB

16 Bit 0.5mm ADC microPOWER? Series SM73201 5V 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-SM73201IMME/NOPB
Package: 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 293
Description: 16 Bit 0.5mm ADC microPOWER? Series SM73201 5V 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Number of Pins	10
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
Series	microPOWER™
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Subcategory	Analog to Digital Converters
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.5mm
Base Part Number	SM73201
Pin Count	10
Operating Supply Voltage	5V
Polarity	Bipolar
Configuration	S/H-ADC
Max Supply Voltage	5.5V
Min Supply Voltage	4.5V
Nominal Supply Current	1.16mA
Number of Bits	16
Input Type	Differential
Architecture	SAR
Converter Type	ADC, SUCCESSIVE APPROXIMATION
Reference Type	External
Data Interface	SPI
Resolution	2 B
Sampling Rate	250 ksps
Voltage - Supply, Analog	5V
Voltage - Supply, Digital	2.7V~5.5V
Number of Analog In Channels	1
Sampling Rate (Per Second)	250k
Output Bit Code	2'S COMPLEMENT BINARY
Power Consumption	5.3mW
Integral Nonlinearity (INL)	0.8 LSB
Sample and Hold / Track and Hold	SAMPLE
Number of Converters	1
Ratio - S/H:ADC	1:1
Output Format	SERIAL
Height	1.07mm
Length	3mm
Width	3mm
Thickness	1.02mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SM73201IMME/NOPB Overview

The analogue to digital converter is designed with 16 Bits.The AD converter is embedded in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package.The ADC converter is packaged in the way of Tape & Reel (TR).The ADC converter is equipped with 1 Functions .There are 10 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 1 channels.The is equipped with 10 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 250k Hz.The input type of this electronic AD converter is Differential.There are External reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is SAR.There are 10 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 2 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to SM73201 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.The supply/digital voltage of this electrical AD converter is 2.7V~5.5V.The ADC converter is possible to mount the device with the help of Surface Mount.The ADC converter operates with the maximal supply voltage of 5.5V.It operates with the minimal supply voltage of 4.5V.The output formats of this electrical AD converter are SERIAL , which are used to determine which data is exported and how data is displayed in many areas of OLIB.This electrical digital converter operates from a supply voltage of 5V.There are 1 converters, which will convert numbers to words and figures to words. It is a type of FPGA belonging to the microPOWER? series.