SM73302MF/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | SolarMagic™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Base Part Number | SM73302 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Circuits | 1 |
| Operating Supply Current | 1.15mA |
| Nominal Supply Current | 1.15mA |
| Output Current | 60mA |
| Slew Rate | 35V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 83 dB |
| Current - Input Bias | 0.1pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 10μV |
| Unity Gain BW-Nom | 88000 kHz |
| Voltage Gain | 110dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 88MHz |
| Max I/O Voltage | 480μV |
| Wideband | NO |
| Power | NO |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SM73302MF/NOPB Overview
There is a SC-74A, SOT-753 case in which the instrumentation amplifier is packaged. Op amps are General Purpose types of amplifier on the chip. A Tape & Reel (TR) case is used to deliver the buffer op amp. The number of terminations approaches 5. Buffer amplifier has a total of 5 pins on it. Please take in mind that this instrumentation amplifier should be run at 2.5V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. There are 5 pins on this chip. Op amp ic rates 10μV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. Using an 1.15mA supply current, this operational amplifier ics can be operated. It is recommended to keep the voltage gain at 110dB at all times. A instrumentation amplifier like this has 1 circuits. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. This linear amplifier pack is based on the TR axis. SolarMagic? corresponds to the op amp's series.
SM73302MF/NOPB Features
5 Pins
supply voltage of 2.5V
110dB voltage gain
Output Type: Rail-to-Rail
SM73302MF/NOPB Applications
There are a lot of Texas Instruments SM73302MF/NOPB Instrumentational OP Amps applications.
- Exponential operation circuits
- earphone
- Portable electronic products powered by batteries
- Integrator circuits
- Car stereo
- Subtraction operation circuits
- Band-stop filter
- Division circuits
- Inverse/same-phase proportional circuit
- Medical imaging
