SM73308MGE/NOPB
| Parameters | |
|---|---|
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | SolarMagic™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | SM73308 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 600μA |
| Slew Rate | 1.4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 0.23pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Output Current per Channel | 75mA |
| Input Offset Voltage (Vos) | 250μV |
| Bandwidth | 3.5MHz |
| Unity Gain BW-Nom | 3500 kHz |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 3.5MHz |
| Max I/O Voltage | 850μV |
| Power | NO |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 20 hours ago) |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
SM73308MGE/NOPB Overview
A 5-TSSOP, SC-70-5, SOT-353 case is used to package the op amp. A General Purpose-type buffer amplifier is shown here. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. During the past two weeks, there have been close to 5 terminations. There are a total of 5 pins on this op amp. I would like to remind you that this buffer op amp should be powered by an 5V battery. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. The buffer op amp includes 5 pins. There is an input offset voltage of 250μV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. It is possible to operate this buffer amplifier from a supply current of 600μA . There are 1 channels on the operational amplifiers. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. It is used TR to pack the op amps. SolarMagic? corresponds to the op amp's series.
SM73308MGE/NOPB Features
5 Pins
supply voltage of 5V
Output Type: Rail-to-Rail
SM73308MGE/NOPB Applications
There are a lot of Texas Instruments SM73308MGE/NOPB Instrumentational OP Amps applications.
- Integrator circuits
- single/dual op amp sum and difference circuits
- Video conversion and routing
- PDA
- Communication
- Comparator
- High speed sample
- Signal operation
- Test and measurement instruments
- pH (acidity)
