SM73308MGX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | SolarMagic™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | SM73308 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Circuits | 1 |
| Current - Supply | 600μA |
| Slew Rate | 1.4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 0.23pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Unity Gain BW-Nom | 3500 kHz |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 250μV |
| Current - Output / Channel | 75mA |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 3.5MHz |
| Max I/O Voltage | 850μV |
| Wideband | NO |
| Power | NO |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SM73308MGX/NOPB Overview
There is a 5-TSSOP, SC-70-5, SOT-353 case in which the instrumentation amplifier is packaged. Op amps are General Purpose types of amplifier on the chip. The op amp is delivered to you in a Tape & Reel (TR) case. There have been a total of 5 terminations over the past year. It consists of a total of 5 pins in total. I would like to remind you that this buffer op amp should be powered by an 5V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 5 pins are located on the operational amplifiers. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. On this instrumentation amplifier, there are 1 circuits that are connected together. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. This linear amplifier pack is based on the TR axis. There is a recommendation that this electrical part be used with a supply with 600μA current rating. As the name implies, SolarMagic? refers to the series of the buffer op amp.
SM73308MGX/NOPB Features
5 Pins
supply voltage of 5V
Output Type: Rail-to-Rail
SM73308MGX/NOPB Applications
There are a lot of Texas Instruments SM73308MGX/NOPB Instrumentational OP Amps applications.
- Precision measurement
- Automation control systems
- High-frequency data acquisition systems
- Video amplifiers
- Micro signal measurement
- Automatic control
- Power generator
- Measurements of Wheatstone bridge
- Multimedia playback equipment
- Radar
