SM74104SDX/NOPB
| Parameters | |
|---|---|
| Technology | BCDMOS |
| Voltage - Supply | 9V~14V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Base Part Number | SM74104 |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Max Output Current | 1.6A |
| Max Supply Current | 3mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 270 ns |
| Turn-Off Delay Time | 130 ns |
| Rise / Fall Time (Typ) | 600ns 600ns |
| Channel Type | Synchronous |
| Output Peak Current Limit-Nom | 1.8A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.6A 1.6A |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| High Side Voltage - Max (Bootstrap) | 118V |
| Height | 800μm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 750μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
SM74104SDX/NOPB Overview
Its 10-WDFN Exposed Pad package provides greater flexibility.A packaging method of Tape & Reel (TR) is used.Gate drivers is mounted in the way of Surface Mount.In the absence of a power supply voltage of 9V~14V V, it is able to demonstrate its superiority.Gate drivers is designed wGate driversh a gate type of N-Channel MOSFET.This device is allowed to operate in a temperature range of -40°C~125°C TJ.The input type for this program is Non-Inverting.Mosfet driver consists of 10 terminations as Mosfet drivers foundation.Numerous related parts can be found under its base part number SM74104.The mount method is Surface Mount.At the time of design, it is configured with 10 pins.In addition, it is specifically designed to operate with a supply voltage of 12V.In the maximum case, the output current can be limited to 1.6A.There are various useful electronic components in its subcategory MOSFET Drivers.On the board, there are 10 component pins.Mosfet driver is possible for the high-side voltage - Max (Bootstrap) to be as low as 118V.There are 2 outputs integrated for its basis.If you want a stable supply current, you should keep it at 3mA.
SM74104SDX/NOPB Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
10 pins
High-side voltage - Max (Bootstrap) of 118V
SM74104SDX/NOPB Applications
There are a lot of Texas Instruments SM74104SDX/NOPB gate drivers applications.
- Isolated Supplies for Motor Control
- Telecom switch mode power supplies
- Broadcast equipment
- Line drivers
- PCMCIA applications
- Topologies
- Isolated Supplies for controller area network (CAN),
- LCD/LCoS/DLP portable and embedded pico projectors
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- A/D drivers
