SMJ320C40HFHM50
| Parameters | |
|---|---|
| Internal Bus Architecture | MULTIPLE |
| Number of DMA Channels | 6 |
| Height | 4.55mm |
| Length | 7.63mm |
| Width | 7.63mm |
| Thickness | 4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Number of Pins | 352 |
| Number of Terminations | 352 |
| ECCN Code | 3A001.A.2.C |
| Max Operating Temperature | 100°C |
| Min Operating Temperature | -55°C |
| HTS Code | 8542.31.00.01 |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | FLAT |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 352 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| RAM Size | 8kB |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Supply Current-Max | 850mA |
| Bit Size | 32 |
| Frequency (Max) | 50MHz |
| Data Bus Width | 32b |
| ROM (words) | 4G |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Screening Level | MIL-PRF-38535 |
| Format | FLOATING POINT |
| Integrated Cache | NO |
| RAM (words) | 2000 |
| Number of Timers | 2 |
| Number of External Interrupts | 5 |
| Barrel Shifter | YES |
SMJ320C40HFHM50 Overview
The use of it is terminated by 352.It works with a voltage of 5V as a supply voltage.352 components have pins.The configuration of the device includes 352 pins.50MHz is a frequency at which the device operates according to a specific design.The mounting method is Surface Mount.This device can be classified into the subcategory Digital Signal Processors based on its specific characteristics.It is possible to supply as low a voltage as 4.75V to this device.It can be supplied with a maximum voltage of 5.25V.This device is powered by a voltage of 5V.It receives electricity from 5V.For its uPs/uCs/peripheral ICs, DIGITAL SIGNAL PROCESSOR, OTHER is used.Operating temperatures should be lower than 100°C.Over -55°C, the operating temperature should be maintained.A 2 timer can give accurate feedback and activate events in industrial settings.Interrupts caused by an external source cause 5 interrupts.Below 50MHz is the maximum frequency that should be used.To prevent CPU overload, 6 DMA channels are used to transfer data.
SMJ320C40HFHM50 Features
Operating supply voltage of 5V
DIGITAL SIGNAL PROCESSOR, OTHER as uPs/uCs/Peripheral Ics
5 external interrupts
SMJ320C40HFHM50 Applications
There are a lot of Texas Instruments SMJ320C40HFHM50 DSP applications.
- Audio compression
- Consumer electronic gadgets
- Biomedical engineering
- Digital image processing
- Seismology
- Smart phones
- Other sensor array processing
- Streaming videos
- Spectral density estimation
- Image signal processing
