SMOMAPL138BGWTA3R
| Parameters | |
|---|---|
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Package / Case | 361-LFBGA |
| Number of Pins | 361 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Cut Tape (CT) |
| Series | OMAP-L1x |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 361 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Other uPs/uCs/Peripheral ICs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.8mm |
| Frequency | 375MHz |
| Base Part Number | OMAP-L138 |
| Pin Count | 361 |
| Voltage | 1.35V |
| Max Supply Voltage | 1.35V |
| Min Supply Voltage | 950mV |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | ARM926EJ-S |
| Bit Size | 32 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.8V 3.3V |
| Number of UART Channels | 3 |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | LPDDR, DDR2 |
| USB | USB 1.1 + PHY (1), USB 2.0 + PHY (1) |
| Additional Interfaces | HPI, I2C, McASP, McBSP, MMC/SD, SPI, UART |
| Co-Processors/DSP | Signal Processing; C674x, System Control; CP15 |
| Security Features | Boot Security, Cryptography |
| Display & Interface Controllers | LCD |
| SATA | SATA 3Gbps (1) |
| Height | 1.4mm |
| Length | 16mm |
| Width | 16mm |
| Thickness | 900μm |
SMOMAPL138BGWTA3R Overview
The embedded microprocessor has been packed in 361-LFBGA for convenient overseas shipping. High reliability is achieved by using advanced packaging methods Cut Tape (CT). CPUs have 1 Core 32-Bit cores/bus width. K-40°C~105°C TJw what the operating temperature is around -40°C~105°C TJ. A OMAP-L1x series item. ARM926EJ-S processors are embedded in this CPU. There are LPDDR, DDR2 RAM controllers used by this CPU. This microprocessor features HPI, I2C, McASP, McBSP, MMC/SD, SPI, UART interfaces to better serve its users. 1.8V 3.3V is the I/O speed of this CPU. uPs/uCs/Peripheral ICs are a MICROPROCESSOR, RISC. The microprocessor can be searched for with OMAP-L138 if you are looking for variants. A total of 361 terminations have been recorded. When the voltage supply is 1.2V, the cpu microprocessor should be powered on and run. It is an architecture with 32 bits. CPUs operate at 375MHz Hz. You can find information about the functions of 361 pins in the datasheets. An example of a Other uPs/uCs/Peripheral ICs embedded microprocessor. Injecting pins into the embedded microprocessor body results in 361 pins. As a result of its Surface Mount mounting, this CPU is widely used in a wide variety of applications. 1.35V is the core voltage of the CPU. normally, the microprocessor should not receive a voltage higher than 1.35V. The lowest voltage that should be applied to the micro processor is 950mV. With this CPU microprocessor, you get 3 UART (Universal Asynchro3us Receiver/Transmitter) channels.
SMOMAPL138BGWTA3R Features
ARM926EJ-S Core
32-Bit Structure
SMOMAPL138BGWTA3R Applications
There are a lot of Texas Instruments SMOMAPL138BGWTA3R Microprocessor applications.
- Heart rate monitors
- Process control devices
- Network communication, mobile communication field
- Electromechanical control
- Guidance-GPS
- Auto-breaking system
- Coffee machines
- Removable disks
- Speed meter
- Pacemakers (used to control abnormal heart rhythm)
