SN10501DBVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Weight | 13.012431mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | Voltage Feedback |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 391mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | SN10501 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 8V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Operating Supply Current | 14mA |
| Nominal Supply Current | 15mA |
| Power Dissipation | 391mW |
| Output Current | 100mA |
| Slew Rate | 900V/μs |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Output Current per Channel | 100mA |
| Input Offset Voltage (Vos) | 25mV |
| Bandwidth | 100000 kHz |
| Gain Bandwidth Product | 120MHz |
| Voltage Gain | 100dB |
| Power Supply Rejection Ratio (PSRR) | 62dB |
| Settling Time | 25 ns |
| -3db Bandwidth | 170MHz |
| Dual Supply Voltage | 5V |
| Input Bias Current | 5μA |
| Consumer IC Type | VIDEO AMPLIFIER |
| Max I/O Voltage | 30mV |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN10501DBVR Overview
In the form of a Tape & Reel (TR), class d amplifier is packaged.SC-74A, SOT-753 package reduces space by providing access to class d amp.It is an excellent choice for Voltage Feedback because audio amplifier is highly efficient.A Surface Mount method is used to mount audio power amplifier on the PCB.Audio amp can be located by using SN10501 as the base part number.A pin count of 5 can be found on audio digital amplifier.Digital amplifier consists of 5 terminations.Its -3db bandwidth is 170MHz.It is included in Audio/Video Amplifiers.A 14mA supply current is used for operation.Amplifier ic uses 5 pins for construction.It is recommended to operate at a temperature below 85°C.An operating temperature of at least -40°C is recommended.The current channel count is 1.VIDEO AMPLIFIER is the consumer IC type of the amplifier.This audio amplifier is configured with a maximum supply voltage (Vsup) of 8V.In this scenario, the output current is set to 100mA.A voltage of 100dB is gained by the audio amplifier ic.In total, 1 elements are present.
SN10501DBVR Features
Audio/Video Amplifiers subcategory
5 pins
1 channels
SN10501DBVR Applications
There are a lot of Texas Instruments SN10501DBVR Video Amps and Modules applications.
- High-Fidelity (HiFi) Headphone Drivers
- Microphone Preamplifiers
- Microphone Preamplifier Circuit
- Professional Audio Equipment
- Automotive
- Automotive head unit
- Emergency call (eCall)
- General-Purpose Amplifier Applications
- Broadcast Studio Equipment
- Set-Top Box
