SN10501DGKG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 23.303308mg |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | Voltage Feedback |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 385mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | SN10501 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Supply Voltage-Max (Vsup) | 8V |
| Power Supplies | +-5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Operating Supply Current | 14mA |
| Nominal Supply Current | 15mA |
| Output Current | 100mA |
| Slew Rate | 900V/μs |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Output Current per Channel | 100mA |
| Input Offset Voltage (Vos) | 25mV |
| Bandwidth | 100000 kHz |
| Gain Bandwidth Product | 120MHz |
| Voltage Gain | 100dB |
| Power Supply Rejection Ratio (PSRR) | 62dB |
| Settling Time | 25 ns |
| -3db Bandwidth | 170MHz |
| Input Bias Current | 5μA |
| Consumer IC Type | VIDEO AMPLIFIER |
| Max I/O Voltage | 30mV |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN10501DGKG4 Overview
Tube is how class d amplifier's packaged.In order to save space, class d amp is included in the package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).This is a good choice for Voltage Feedback because of audio amplifiers high performance.Using the Surface Mount method, audio power amplifier is mounted on the PCB.With the use of 1 circuits, the audio ic is capable of achieving an enhanced level of flexibility.In order to audio amp, use the base part number SN10501.There are 8 pins on audio digital amplifier.Digital amplifier has a termination count of 8.Its -3db bandwidth is 170MHz.Audio/Video Amplifiers contains this audio power amplifier.Audio amplifier is powered by 14mA supply current.The board is constructed wamplifier ich 8 pins.The operating temperature should be less than 85°C.Minimum operating temperature is -40°C.A total of 1 channels are currently available.The consumer IC type of the amplifier is VIDEO AMPLIFIER.It is set to 8V as the maximum supply voltage (Vsup).This scenario results in a current output of 100mA.There is a voltage gain of 100dB on the audio amplifier ic.
SN10501DGKG4 Features
Audio/Video Amplifiers subcategory
8 pins
1 channels
SN10501DGKG4 Applications
There are a lot of Texas Instruments SN10501DGKG4 Video Amps and Modules applications.
- Premium Audio
- High-End A/V Receivers
- Audio Test and Measurement
- Automotive external amplifier
- Preamplification and Filtering
- High-Fidelity (HiFi) Headphone Drivers
- Audio Test And Measurement
- Automotive active noise cancellation
- General-Purpose Amplifier Applications
- Automotive
