SN10501DGKR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Weight | 23.303308mg |
| Packaging | Tape & Reel (TR) |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | Voltage Feedback |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 385mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | SN10501 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Supply Voltage-Max (Vsup) | 8V |
| Power Supplies | +-5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Operating Supply Current | 14mA |
| Nominal Supply Current | 15mA |
| Slew Rate | 900V/μs |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Output Current per Channel | 100mA |
| Input Offset Voltage (Vos) | 25mV |
| Bandwidth | 100000 kHz |
| Gain Bandwidth Product | 120MHz |
| Voltage Gain | 100dB |
| Power Supply Rejection Ratio (PSRR) | 62dB |
| -3db Bandwidth | 170MHz |
| Input Bias Current | 3μA |
| Consumer IC Type | VIDEO AMPLIFIER |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN10501DGKR Overview
There is a Tape & Reel (TR) packaged wclass d amplifierh class d amplifier.Due to space constraints, class d amp's available in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).This is a good choice for Voltage Feedback because of audio amplifiers high performance.Using the Surface Mount method, audio power amplifier is mounted on the PCB.Using 1 circuits enhances audio ic's flexibility.It has a base part number of SN10501, which allows for easy identification of audio amp.On audio digital amplifier, there is a pin count of 8.Digital amplifier has a termination count of 8.Its -3db bandwidth is 170MHz.It is audio power amplifier of Audio/Video Amplifiers.This amplifier operates on a current supply of 14mA.The board is constructed using 8 pins.It is recommended to operate at a temperature below 85°C.At least -40°C is recommended as the operating temperature.A total of 1 channels are available at the moment.The consumer IC type of the amplifier is VIDEO AMPLIFIER.In order to mount it, Surface Mount is used.In this audio amplifier, the maximum supply voltage (Vsup) is set to 8V.There is a voltage gain of 100dB in the audio amplifier ic.
SN10501DGKR Features
Audio/Video Amplifiers subcategory
8 pins
1 channels
SN10501DGKR Applications
There are a lot of Texas Instruments SN10501DGKR Video Amps and Modules applications.
- Audio Test And Measurement
- Automotive head unit
- Automotive active noise cancellation
- Microphone Preamplifier Circuit
- Preamplification and Filtering
- Analog and Digital Mixing Consoles
- Analog and Digital Mixing Consoles
- Professional Audio Equipment
- Automotive
- Premium Audio
