SN10501DGKRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Weight | 23.303308mg |
| Packaging | Tape & Reel (TR) |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | Voltage Feedback |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 385mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | SN10501 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Supply Voltage-Max (Vsup) | 8V |
| Power Supplies | +-5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Operating Supply Current | 14mA |
| Nominal Supply Current | 15mA |
| Slew Rate | 900V/μs |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Output Current per Channel | 100mA |
| Input Offset Voltage (Vos) | 25mV |
| Bandwidth | 100000 kHz |
| Gain Bandwidth Product | 120MHz |
| Voltage Gain | 100dB |
| Power Supply Rejection Ratio (PSRR) | 62dB |
| -3db Bandwidth | 170MHz |
| Input Bias Current | 3μA |
| Consumer IC Type | VIDEO AMPLIFIER |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN10501DGKRG4 Overview
Tape & Reel (TR) is how class d amplifier's packaged.Due to space constraints, class d amp's available in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).Because of audio amplifiers high performance, audio amplifier is an excellent choice for Voltage Feedback.Mounting audio power amplifier on the PCB is done using the Surface Mount method.With the use of 1 circuits, the audio ic is capable of achieving an enhanced level of flexibility.Audio amp can be located using its base part number SN10501.There are 8 pins on audio digital amplifier.8 terminations make up digital amplifiers structure.Its -3db bandwidth is 170MHz.I have included this audio power amplifier in Audio/Video Amplifiers.A supply current of 14mA is required to operate audio amplifier.In this case, there are 8 pins used in amplifier ics construction.If the temperature is less than 85°C, the system should operate.It is recommended that the operating temperature is at least -40°C.Currently, there are 1 channels available.There is VIDEO AMPLIFIER consumer IC type for this amplifier.Surface Mount is used as its mounting method.8V is the maximum supply voltage (Vsup).A voltage of 100dB is achieved by the audio amplifier ic.
SN10501DGKRG4 Features
Audio/Video Amplifiers subcategory
8 pins
1 channels
SN10501DGKRG4 Applications
There are a lot of Texas Instruments SN10501DGKRG4 Video Amps and Modules applications.
- Car Audio
- Microphone Preamplifier Circuit
- Automotive external amplifier
- Automotive active noise cancellation
- Telematics control unit
- Broadcast Studio Equipment
- Premium Audio
- Body Control Modules
- Emergency call (eCall)
- Analog and Digital Mixing Consoles
