SN10502DGK
| Parameters | |
|---|---|
| Settling Time | 25 ns |
| -3db Bandwidth | 170MHz |
| Dual Supply Voltage | 5V |
| Input Bias Current | 5μA |
| Consumer IC Type | VIDEO AMPLIFIER |
| Max I/O Voltage | 30mV |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 23.303308mg |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | Voltage Feedback |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 385mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Terminal Pitch | 0.65mm |
| Base Part Number | SN10502 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 8V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Operating Supply Current | 14mA |
| Nominal Supply Current | 30mA |
| Power Dissipation | 385mW |
| Output Current | 100mA |
| Slew Rate | 900V/μs |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Output Current per Channel | 100mA |
| Input Offset Voltage (Vos) | 25mV |
| Bandwidth | 100000 kHz |
| Gain Bandwidth Product | 120MHz |
| Voltage Gain | 100dB |
| Power Supply Rejection Ratio (PSRR) | 62dB |
SN10502DGK Overview
This package is packaged as a Tube.As a space saver, class d amp is accessible from the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package.As a result of audio amplifiers high performance, audio amplifier is a great choice for Voltage Feedback.According to Surface Mount, audio power amplifier is mounted on the PCB.It has a base part number of SN10502 that can be used to audio amp.Audio digital amplifier has a pin count of 8 on audio digital amplifier.Digital amplifier has 8 terminations.Its -3db bandwidth is 170MHz.It is included in Audio/Video Amplifiers.Audio amplifier is powered by 14mA supply current.Amplifier ic is constructed using 8 pins.In order to ensure proper operation, the operating temperature should be below 85°C.The operating temperature should be at least -40°C.A total of 1 channels are currently available.This amplifier has a consumer integrated circuit type of VIDEO AMPLIFIER.It is set to 8V as the maximum supply voltage (Vsup).This scenario has a current output of 100mA.During use, 5V is provided as a supply voltage.Upon gaining a voltage of 100dB, the audio amplifier ic becomes functional.There are 2 elements in total in this element.
SN10502DGK Features
Audio/Video Amplifiers subcategory
8 pins
1 channels
SN10502DGK Applications
There are a lot of Texas Instruments SN10502DGK Video Amps and Modules applications.
- Audio Test And Measurement
- Telematics control unit
- Emergency call (eCall)
- Premium Audio
- Microphone Preamplifiers
- Automotive
- HiFi Audio System Equipment
- General-Purpose Amplifier Applications
- Set-Top Box
- High-Fidelity (HiFi) Headphone Drivers
