SN10502DGKR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 23.303308mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | Voltage Feedback |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 385mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Terminal Pitch | 0.65mm |
| Base Part Number | SN10502 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Supply Voltage-Max (Vsup) | 8V |
| Power Supplies | +-5V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 1.35V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Operating Supply Current | 14mA |
| Nominal Supply Current | 30mA |
| Output Current | 100mA |
| Slew Rate | 900V/μs |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Output Current per Channel | 100mA |
| Input Offset Voltage (Vos) | 25mV |
| Bandwidth | 100000 kHz |
| Gain Bandwidth Product | 120MHz |
| Voltage Gain | 100dB |
| Power Supply Rejection Ratio (PSRR) | 62dB |
| Settling Time | 25 ns |
| -3db Bandwidth | 170MHz |
| Input Bias Current | 5μA |
| Consumer IC Type | VIDEO AMPLIFIER |
| Max I/O Voltage | 30mV |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN10502DGKR Overview
Class d amplifier's packaged in the form of a Tape & Reel (TR).Due to space constraints, class d amp's available in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).Its high performance makes it an excellent choice for Voltage Feedback.On the PCB, audio power amplifier is mounted in accordance waudio power amplifierh the method described by Surface Mount.The 2 circuits provide audio ic's enhanced flexibility.It has a base part number of SN10502 that can be used to audio amp.The number of pins is 8.There are 8 terminations on digital amplifier.Its -3db bandwidth is 170MHz.The audio power amplifier is included in Audio/Video Amplifiers.A supply current of 14mA is required to operate audio amplifier.Amplifier ic uses 8 pins for construction.In order to ensure proper operation, the operating temperature should be below 85°C.It is recommended that the operating temperature is at least -40°C.A total of 1 channels are currently available.This amplifier has a consumer IC type of VIDEO AMPLIFIER.Keeping the supply voltage (Vsup) above 1.35V is necessary for normal operation.The maximum supply voltage (Vsup) is set to 8V.A 100mA output current is used in this scenario.A voltage of 100dB is gained by the audio amplifier ic.
SN10502DGKR Features
Audio/Video Amplifiers subcategory
8 pins
1 channels
SN10502DGKR Applications
There are a lot of Texas Instruments SN10502DGKR Video Amps and Modules applications.
- Audio Test And Measurement
- Emergency call (eCall)
- Analog and Digital Mixing Consoles
- General-Purpose Amplifier Applications
- High-End A/V Receivers
- Microphone Preamplifiers
- Set-Top Box
- High-Fidelity (HiFi) Headphone Drivers
- Analog and Digital Mixing Consoles
- Automotive external amplifier
