SN10502DGN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 24.408939mg |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | Voltage Feedback |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 1.71W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Terminal Pitch | 0.65mm |
| Base Part Number | SN10502 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 8V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Operating Supply Current | 14mA |
| Nominal Supply Current | 30mA |
| Power Dissipation | 1.71W |
| Output Current | 100mA |
| Slew Rate | 900V/μs |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Output Current per Channel | 100mA |
| Input Offset Voltage (Vos) | 25mV |
| Bandwidth | 100000 kHz |
| Gain Bandwidth Product | 120MHz |
| Voltage Gain | 100dB |
| Power Supply Rejection Ratio (PSRR) | 62dB |
| Settling Time | 25 ns |
| -3db Bandwidth | 170MHz |
| Dual Supply Voltage | 5V |
| Input Bias Current | 5μA |
| Consumer IC Type | VIDEO AMPLIFIER |
| Max I/O Voltage | 30mV |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN10502DGN Overview
This package is packaged as a Tube.Consequently, class d amp is available in package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad.Considering its high performance, it is an excellent choice for Voltage Feedback.Based on Surface Mount, audio power amplifier is mounted on the PCB.Audio amp can be located using its base part number SN10502.On audio digital amplifier, there is a pin count of 8.There are 8 terminations on digital amplifier.Its -3db bandwidth is 170MHz.It is included in Audio/Video Amplifiers.Audio amplifier is powered by a 14mA supply current.8 pins are used to construct amplifier ic.If the temperature is less than 85°C, the system should operate.Temperatures of at least -40°C are recommended for operation.There are currently 1 channels available.This amplifier has a consumer IC type of VIDEO AMPLIFIER.8V is the maximum supply voltage (Vsup).This scenario has a current output of 100mA.It is observed that the audio amplifier ic gains a voltage of 100dB.2 elements make up the total.
SN10502DGN Features
Audio/Video Amplifiers subcategory
8 pins
1 channels
SN10502DGN Applications
There are a lot of Texas Instruments SN10502DGN Video Amps and Modules applications.
- Automotive external amplifier
- Automotive head unit
- Set-Top Box
- Body Control Modules
- HiFi Audio System Equipment
- Emergency call (eCall)
- High-Fidelity (HiFi) Headphone Drivers
- Analog and Digital Mixing Consoles
- Aftermarket telematics
- Analog and Digital Mixing Consoles
