SN10502DGNRG4
| Parameters | |
|---|---|
| Weight | 24.408939mg |
| Packaging | Tape & Reel (TR) |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | Voltage Feedback |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 1.71W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | SN10502 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Supply Voltage-Max (Vsup) | 8V |
| Power Supplies | +-5V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 1.35V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Operating Supply Current | 14mA |
| Nominal Supply Current | 30mA |
| Slew Rate | 900V/μs |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Output Current per Channel | 100mA |
| Input Offset Voltage (Vos) | 25mV |
| Bandwidth | 100000 kHz |
| Gain Bandwidth Product | 120MHz |
| Voltage Gain | 100dB |
| Power Supply Rejection Ratio (PSRR) | 62dB |
| -3db Bandwidth | 170MHz |
| Input Bias Current | 3μA |
| Consumer IC Type | VIDEO AMPLIFIER |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
SN10502DGNRG4 Overview
Class d amplifier's packaged in the form of a Tape & Reel (TR).As a space saver, class d amp is accessible from the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package.Its high performance makes it an excellent choice for Voltage Feedback.Using the Surface Mount method, audio power amplifier is mounted on the PCB.With 2 circuits, audio ic has enhanced flexibility.It has a base part number of SN10502, which allows for easy identification of audio amp.There are 8 pins on audio digital amplifier.Digital amplifier is made up of 8 terminations.Its -3db bandwidth is 170MHz.It is included in Audio/Video Amplifiers.Audio amplifier is powered by 14mA supply current.Amplifier ic uses 8 pins for construction.Operating temperatures must be lower than 85°C.It is recommended that the operating temperature be at least -40°C.Presently, there are a total of 1 channels that are available to users.This amplifier has a consumer IC type of VIDEO AMPLIFIER.Surface Mount is used as its mounting method.If the supply voltage (Vsup) is above 1.35V, normal operation can be achieved.Vsup is set to 8V as the maximum supply voltage.Upon gaining a voltage of 100dB, the audio amplifier ic becomes functional.
SN10502DGNRG4 Features
Audio/Video Amplifiers subcategory
8 pins
1 channels
SN10502DGNRG4 Applications
There are a lot of Texas Instruments SN10502DGNRG4 Video Amps and Modules applications.
- Analog and Digital Mixing Consoles
- Analog and Digital Mixing Consoles
- Automotive head unit
- Body Control Modules
- External Audio Amplifiers
- High-End A/V Receivers
- Set-Top Box
- Broadcast Studio Equipment
- Microphone Preamplifier Circuit
- Car Audio
