SN10502DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | Voltage Feedback |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 1.02W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Base Part Number | SN10502 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Supply Voltage-Max (Vsup) | 8V |
| Power Supplies | +-5V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 1.35V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Operating Supply Current | 14mA |
| Nominal Supply Current | 30mA |
| Output Current | 100mA |
| Slew Rate | 900V/μs |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Output Current per Channel | 100mA |
| Input Offset Voltage (Vos) | 25mV |
| Bandwidth | 100000 kHz |
| Gain Bandwidth Product | 120MHz |
| Voltage Gain | 100dB |
| Power Supply Rejection Ratio (PSRR) | 62dB |
| Settling Time | 25 ns |
| -3db Bandwidth | 170MHz |
| Input Bias Current | 5μA |
| Consumer IC Type | VIDEO AMPLIFIER |
| Max I/O Voltage | 30mV |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN10502DR Overview
A Tape & Reel (TR) package contains class d amplifier.8-SOIC (0.154, 3.90mm Width) package reduces space by making class d amp available.It is an excellent choice for Voltage Feedback because audio amplifier is highly efficient.Mounting the board based on Surface Mount is the preferred method.A number of 2 circuits are utilized to enhance the audio ic's flexibility of the system.Audio amp to it have the same base part number SN10502.A pin count of 8 can be found on audio digital amplifier.Digital amplifier is made up of 8 terminations.Its -3db bandwidth is 170MHz.It is audio power amplifier of Audio/Video Amplifiers.Audio amplifier is powered by 14mA supply current.The board is constructed wamplifier ich 8 pins.There should be a minimum temperature of 85°C.It is recommended that the operating temperature be at least -40°C.Presently, there are a total of 1 channels that are available to users.Its consumer IC type is VIDEO AMPLIFIER.It is recommended that the supply voltage (Vsup) be kept above 1.35V for normal operation of the audio amplifier.It is set to 8V as the maximum supply voltage (Vsup).This scenario has a current output of 100mA.It is observed that the audio amplifier ic gains a voltage of 100dB.
SN10502DR Features
Audio/Video Amplifiers subcategory
8 pins
1 channels
SN10502DR Applications
There are a lot of Texas Instruments SN10502DR Video Amps and Modules applications.
- Analog and Digital Mixing Consoles
- Professional Audio Equipment
- Professional Audio Equipment
- Broadcast Studio Equipment
- High-End A/V Receivers
- Analog and Digital Mixing Consoles
- Microphone Preamplifier Circuit
- Automotive active noise cancellation
- Body Control Modules
- Audio Test And Measurement
